Starting Your Washing Machine; Choosing Your Own Wash Program Settings; Program Button & Wash Program Guide; Water Aid Recirculation System Active Programs - Electrolux EWT606 User Manual

Operating your washing machine

Starting your washing machine

1. Turn on the taps
2. Close the lid
3. Press the Power button
Power button
The machine will 'beep" twice, briefly display a number in
the digital display and then it is ready for you to select the
wash program settings.
Please wait for this to happen before attempting to operate
the machine.
If the displayed settings are what you want to use then
press Start/Pause to start the wash program.
To select a different program or change other settings, read
the following instructions.
NOTE: On powering up the machine, and also after a wash
has finished in preparation for the next wash, the water level
defaults to auto sensing and rinse defaults to Eco. (If your
last wash was a Drip dry / Deep rinse program, then rinse
will stay at deep).

Choosing your own wash program settings

wash is in progress or when the machine is paused.
before a change to settings takes effect. This is to allow
you time to complete your desired changes.
progress of the wash may not continue exactly from
where it was in the program before the change.
selection you make is unavailable at the time, you will
hear a long 'error beep'.
Wash program guide
Wash program
(Program button)
Intensive
*(includes 6 minute soak)
Normal/Heavy
Normal
Wool
Delicate
* Intensive has a built-in 6 minute soak period at the start of the wash program. Any soak period you have selected will be added to the 6 minutes. (See
information at "Soak option" on page 12)
electrolux water aid washing machine operating your washing machine 7
Recommended Recommended
dirt level temp. wash water
Heavy
Medium
Medium
Medium or Light
Light
Program button
Press the Program button until the light
indicates the program you want to use.
Each press of the Program button changes
the wash program to the next program.
Deep rinse option is automatically selected
for you. You cannot select Eco rinse with

Water Aid recirculation system active programs

Your machine is programmed with the recirculation system
active in most wash and deep rinse stages of the various
wash programs. The following table shows when the
recirculation is active during wash and deep rinse, for the
Is the recirculation system active?
Dirt Level Light
Wash Program
Intensive No
Normal / Heavy Yes
Normal Yes
Yes
Delicate Yes
NOTE: Eco Rinse
With most programs you have an option of selecting an Eco
Rinse, in which case the Deep Rinse column of the table above
is not relevant. Recirculation is not active during Eco Rinse.
Using the program
Select this program for a heavily soiled cotton wash
load.
Select this program for a full load of normally soiled
cottons.
Select this program for an average domestic load of
mixed fabrics.
Select this program for woollen clothes. Only wash
woollens labelled 'machine washable'.
Select this program for lingerie, lace trimmed and
embroidered items.
Medium
Deep Deep
Rinse Rinse
No No No No
Yes Yes Yes No
Yes Yes Yes No
Yes Yes Yes No
Yes Yes Yes No
Heavy
Deep
Rinse
No
No
Yes
Yes
Yes