Installation - Electrolux ERN28700 User Manual

Hide thumbs Also See for ERN28700:
Table of Contents

Advertisement

The technical information are situated in the
rating plate on the internal left side of the
appliance and in the energy label.

INSTALLATION

Read the "Safety Information" carefully
for your safety and correct operation of
the appliance before installing the
appliance.
Positioning
Install this appliance at a location where the
ambient temperature corresponds to the
climate class indicated on the rating plate of
the appliance:
Climate
Ambient temperature
class
SN
+10°C to + 32°C
N
+16°C to + 32°C
ST
+16°C to + 38°C
T
+16°C to + 43°C
Electrical Connection
Caution! Any electrical work required
to install this appliance should be
carried out by a qualified electrician or
competent person.
Warning! This appliance must be
earthed.
The manufacturer declines any liability
should these safety measures not be
observed.
1
5
Important! The wires in the mains lead are
coloured in accordance with the following
code:
1
Green and Yellow:
3
Brown:
5
Blue:
As the colours of the wires in the mains
lead of this appliance may not correspond
with the coloured markings identifying the
terminals in your plug, proceed as follows:
1. Connect the wire coloured green and
yellow to the terminal marked either with
the letter "E" or by the earth symbol
or coloured green and yellow.
2. Connect the wire coloured blue to the
terminal either marked with the letter
"N" or coloured black.
3. Connect the wire coloured brown to the
terminal either marked with the "L" or
coloured red.
4. Check that no cut, or stray strands of
wire is present and the cord clamp
secure over the outer sheath.
electrolux 11
2
3
4
Earth
Live
Neutral
4
is

Advertisement

Table of Contents
loading

Table of Contents