Important Safety Instructions Your new fridge may have other functions compared to your previous one. Carefully read these instructions to learn how the appliance works and how to care for it. Keep the instruction booklet. It will come in handy if you later sell the cabinet or give it to somebody else. These warnings are provided in the interests of your safety.
Description of the Appliance Model ERC3703 glass shelf bottle shelf bottle shelf door shelf vegetable drawer ventilation grille butter compartment egg holder Control Panel A. Green indicator lamp B. Thermostat control Lights when the fridge is operating. Use to switch on and set the desired temperature in the fridge.
Allow the cabinet to run for a period of 24 hours whenever the temperature setting is changed. This will allow the temperature to stabilise inside the cabinet. Switching off Turn the control anti-clockwise past the click position to "•". Remove the power supply plug from the wall socket. Temperature inside the fridge A suitable temperature inside the fridge is approx.
The vegetable drawer has two moveable partitions with five different choices in order to separate different vegetables. The vegetable drawer has a ventilation edging to increase the circulation of air and reduce the risk of condensation. Hints and Tips Saving energy compartment.
Cleaning Clean the cabinet at regular intervals. Don't use detergents, abrasive powders, high perfumed cleaning products, wax polishes or cleaning products containing bleach or alcohol when cleaning the product Disconnect the appliance from electricity supply. Clean out the drip channel inside the fridge at regular intervals and ensure that the drip channel is clear at all times.
Something Not Working Before contacting your local Service Force Centre check the following point: Problem Possible cause / Remedy It is too warm inside the refrigerator. Set a lower temperature. Put food products in the right place inside the refrigerator. See the chapter "Temperature inside the refrigerator".
Customer Care Department Service and Spare Parts For general enquiries concerning your Electrolux In the event of your appliance requiring service, or appliance or futher information on Electrolux if you wish to purchase spare parts please contact products, you are invited to contact our Customer your local Electrolux Service Force Centre by Care Department by letter or phone as follows: telephoning:...
Remove the transport supports Remove the tape and the transport supports from the door sides · the shelves · Remove the transport support on the glass shelf by pushing the support forward along the edge of the shelf until it stops. Take hold of the rear edge of the glass shelf and pull the shelf and transport support forward until the shelf tilts and the transport support can be removed.
Check that the drain hose at the rear of the cabinet discharges into the drip tray. If the cabinet is placed in a corner and the side with the hinges facing the wall, the distance between the wall and the cabinet must be at least 230 mm to allow the door to open enough so that the shelves can be removed.