3
Align the fuser unit using the handles on each side, and
then place it back into the printer.
3
Close the side door.
4
Touch Continue, jam cleared.
203 paper jam
1
Grasp any jammed paper visible in the standard exit bin, and then
gently pull it out.
Notes:
•
Make sure all paper fragments are removed.
•
If the page is in the fuser, then the fuser nip release lever
should be lowered and should be switched to envelope
mode.
•
After removing the jammed page, return the lever to the
proper position.
2
Touch Continue, jam cleared.
230 paper jam
1
Open the side door.
2
Hold onto the handles of the duplexing unit, open the cover, and
then remove any jammed paper.
CAUTION—HOT SURFACE: The inside of the printer
might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching.
1
2
3
Close the cover on the duplexing unit.
4
Close the side door.
5
Touch Continue, jam cleared.
231–239 paper jams
1
Open the side door.
6
2
Hold onto the handles of the duplexing unit, open the cover, and
then remove any jammed paper.
CAUTION—HOT SURFACE: The inside of the printer
might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching.
1
2
3
Close the cover of the duplexing unit.
4
Close the side door.
5
Touch Continue, jam cleared.