Setting The Year - Emerson Research iE600 Owner's Manual

Setting The Time Display Mode (12 Hour/24 Hour Display)
You have the option of displaying the time in 12-Hour or 24-Hour modes.
12-Hour Mode - The time is displayed in 12-hour cycles with AM or PM indicators.
This is the factory default setting.
24-Hour Mode - The time is displayed in 24-hour cycles with no AM or PM indicators.
This is sometimes referred to as "Military Time".
For example, "6:00 PM" would be displayed as "18:00".
If you wish to change the display from the 12-hour mode to the 24-hour mode,
press the Mode button 4 times, or until "12hr" is flashing in the display.
Then press either the TUN + or TUN – buttons to alternatively to switch between
the 12-hour and 24-hour display modes.
After 10 seconds the display will return to the correct time, and the time will be
displayed in the mode you selected.

Setting The Year

Press the Mode button 5 times, or until the year "2005" starts flashing in the
display.
While the year is flashing press the TUN + button to advance
the display to the correct year.
After 10 seconds the display returns to the correct time.
Setting The Month and Date
Press the Mode button 6 times, or until "1/ 1" is flashing in the
display.
Press the TUN + or TUN – buttons to set the display to the correct Month then
press the Volume + or Volume – buttons to set the display to the correct Date.
After 10 seconds the display returns to the
correct time, month, and date.
iE600_050407.p65
18
18 4/5/2007, 11:50