Playing Compact Discs - Emerson ES11 Owner's Manual

PLAYING COMPACT DISCS

IMPORTANT:
This system can play normal CDs, and most Recordable CDs (CD-R), and
Rewriteable CDs (CD-RW). However the playability of CD-R and CD-RW discs is
dependent on the type of software used for ' ripping' and ' burning' the discs, and
the quality of the blank discs used for recording. 100% playback compatibility
cannot be guaranteed. This is not an indication of any problem with this system.
1.) Press the ON/OFF button on the main unit or remote to turn the system ' On' .
2.) Press the CD button on the main unit or remote to select the CD function.
3.) Press on the CD door in the area marked "OPEN/
CLOSE" to open the door. If you have not already done
so remove the transit protection card from the CD
player and discard it.
4.) Place your CD on the spindle with the printed label side facing up. Press down
on the disc near the center hole to make sure that the disc is properly ' seated'
on the spindle, then close the CD door and make sure that it locks securely.
5.) When the door is closed the CD player will read the Table
of Contents on the disc and after a few seconds the display
will show the total playing time and number of tracks on
the disc.
NOTE: If the disc is inserted upside down, or the disc is damaged, the player
will not be able to read it. In this case the word "disc" will flash in the display.
Insert the disc properly or try another disc.
6.) Press the PLAY/PAUSE
track 1. The display will show the elapsed time of each
track as playback continues.
7.) Adjust the VOLUME and PRESET EQ controls as desired.
8.) To pause momentarily during playback press the PLAY/
PAUSE button again. The sound stops and the time
display flashes but the disc continues to spin. Press the
PLAY/PAUSE
resume normal playback.
ES11_ib022503.p65
button to begin playback on
button once more to cancel pause and
15
15 25/2/2003, 16:05