Table of Contents
Advertisement
7. Click on "Show all devices". Next, select "Standard monitor
types" under the SP box; choose the resolution mode you need
under the "Models" box.
8. Verify that the resolution setting of the monitor display is lower
than or equal to UXGA (1600 × 1200).
If you are using a Notebook:
1. First, follow the steps above to adjust resolution of the
computer.
2. Press the appropriate keys listed below for your notebook
manufacturer to send signal out from notebook to projector.
Example: [Fn]+[F4]
Acer
[Fn]+[F5]
Asus
[Fn]+[F8]
Dell
[Fn]+[F8]
Gateway
[Fn]+[F4]
Mac Apple:
System Preference Display Arrangement Mirror
display
If you experience difficulty changing resolutions or your monitor
freezes, restart all equipment including the projector.
The screen of the Notebook or PowerBook computer is not
displaying your presentation
If you are using a Notebook PC
Some Notebook PCs may deactivate their own screens when a
second display device is in use. Each has a different way to be
reactivated. Refer to your computer's manual for detailed
information.
Image is unstable or flickering
Use "Phase" to correct it. See page 38 for more information.
Change the monitor color setting on your computer.
Image has vertical flickering bar
Use "Frequency" to make an adjustment. See page 38 for more
information.
Check and re-configure the display mode of your graphic card to
make it compatible with the projector.
Appendices
IBM/Lenovo
HP/Compaq
NEC
Toshiba
[Fn]+[F7]
[Fn]+[F4]
[Fn]+[F3]
[Fn]+[F5]
51
English
Advertisement
Table of Contents
