Table of Contents
Advertisement
User Controls
When making a direct connection from your computer to the projector
Step 1: Find an IP Address (192.168.0.100) from LAN function of projector.
Step 2: Select apply and press "Enter" button to submit function or press "menu" key to
exit.
Step 3: To open Network Connections,
click Start, click Control Panel,
click Network and Internet
Connections, and then click
Network Connections. Click the
connection you want to configure,
and then, under Network Tasks
, click Change settings of
this connection.
Step 4: On the General tab, under
This connection uses the
following items, click Internet
Protocol (TCP/IP), and then click
"Properties."
Step 5: Click Use the following IP
address, and type in as below:
1) IP address: 192.168.0.100
2) Subnet mask: 255.255.255.0
3) Default gateway:192.168.0.254
44
English
Step 6: To open Internet Options, click
IE web browser, click Internet
Options, click the Connections
tab and click "LAN Settings..."
Step 7: The Local Area Network (LAN)
Setting dialog box appears, In the
Proxy Server area, cancel the
Use a proxy server for your LAN
check box., then click "OK" button
twice.
Step 8: Open your IE and type in the IP
address of 192.168.0.100 in the
URL then press "Enter" key.
Advertisement
Table of Contents
