Draytek VIGOR 2700GE/E User Manual page 40

To add or edit port settings, click one index number on the page. The index entry setup page
will pop up. In each index entry, you can specify 10 port ranges for diverse services.
However, if you previously have set up WAN Alias in Internet Access>>PPPoE/PPPoA or
Internet Access>>MPoA, you will find that WAN IP appeared for your selection.
Enable Open Ports
Comment
Local Computer
Choose PC
Protocol
Start Port
End Port
Vigor2700Ge/e User's Guide
Check to enable this entry.
Make a name for the defined network application/service.
Enter the private IP address of the local host or click Choose PC to
select one.
Click this button and, subsequently, a window having a list of
private IP addresses of local hosts will automatically pop up. Select
the appropriate IP address of the local host in the list.
Specify the transport layer protocol. It could be TCP, UDP, or -----
(none) for selection.
Specify the starting port number of the service offered by the local
host.
Specify the ending port number of the service offered by the local
host.
35