Honeywell Dolphin Power Tools User Manual page 71

Key Function
StartMenu Enables and disables the Start menu during
Autorun
Debug Controls the debug function at AutoInstall.
TestMode Runs the terminal in test mode and tests the
functionality of AutoInstall. This is a diagnostic tool.
When enabled, applications stored in the
AutoInstall folder, including the radio drivers, are
not loaded during startup.
MaskPassword If a password is entered in the Password key, this
key determines if that password is masked when
entered on the screen.
Programs' Subsections—Dolphins 7850, 7900, & 9500
Here are a few of the standard child sections of the Programs section:
Section Description
Update Attempts to launch an Update.exe application from the SD (Secure Digital) card, if one exists.
AutoRun Attempts to process an Autorun configuration file from the SD card (if one exists); for example,
to install CAB files from the AutoInstall folder in the SD card. One section applies to cold boots
SC1 & SC2
and the other to warm boots.
Reset
Initiates a warm boot after the cold boot during startup. Do
Note: Other subsections launch the executable entered in the
Keys in Each Programs' Subsection—Dolphins 6100, 6500, 7600, 7850, 7900, & 9500
Each Programs' subsection contains or can contain the following keys:
Key Function
Required Keys
—These keys must be present in each Program subsection.
Program Specifies the command line to execute. This is the location of the program's
executable. If you want a Power Tool to launch at startup, enter the location of that
tool's EXE here.
Args Specifies the command line arguments to execute at startup.
Default
1
0
0
1
NOT
disable the Reset section!
Program (see page 4-3) key.
Available Values
0=Disable; the Start menu
is disabled during
Autorun.
1=Enable; the Start menu
is enabled.
0=Disable
1=Enable, an autorun.log
file is created in the
(\Honeywell
\IPSM
for 6100/6500)
folder.
0=Disable
1=Enable
0=Disable
1=Enable
4 - 3