Ezconfig Client Window - Honeywell Dolphin Power Tools User Manual

EXM File Processing
After decoding, EZConfig Client saves EXM files to the location in the terminal selected in the
Path (page 2-20) field on the
in the bar code, EZConfig Client does not save the EXM file.)
There are two types of EXM files: configuration documents and registry documents. EZConfig Client
processes each type of file differently.
Configuration Documents
Registry Documents
Multiple Bar Codes
Some EXM files generate more than one bar code. If multiple bar codes were generated, EZConfig Client
recognizes that there is more than one bar code in the package and tracks each bar code scanned and
decoded. Bar codes can be scanned in any order, but EZConfig Client does not deploy the data until all
the bar codes in the package have been scanned.

EZConfig Client Window

Field
Package ID
Status
Read # box
Accept Unsecure
Bar Codes Tab
If the EXM file was associated with an application, EZConfig Client launches and deploys
the data to that application for processing.
Note: DeviceConfig.exm
the terminal appropriately. After decoding the bar code, EZConfig Client deploys the
data to DeviceConfig.exe, which applies the settings to the terminal.
Registry documents are always associated with EZConfig Client. The
(Execute, page 2-15) determines whether the registry is updated or not. If Execute is
selected, EZConfig Client updates the registry immediately after decoding the bar code.
Description
This is the ID of the entire package.
EZConfig Editor assigns an ID to bar code packages when creating the bar code.
This field displays the decode status of the bar codes scanned so far.
If there is more than one bar code in the package, this field acts as a decode
counter.
The Status field displays:
• How many bar codes have been scanned and
• How many bar codes are in the package
This box displays the list of bar codes scanned and decoded.
This option allows EZConfig Client to scan bar codes that are not encrypted.
Note: By default, all bar codes created in EZConfig Editor are encrypted.
(page 2-20). (If the Temporary, page 2-22, option is selected
must
be associated with DeviceConfig.exe to be processed on
Remote
Execute
option
2 - 33