Glass Cleaning - Dimplex DF3003 Owner's Manual

Maintenance
Figure 7
Back
Ledge
Rear
Tab
side section
Upper Light Bulb Requirements
Quantity of two (2) clear chande-
lier or candelabra bulbs with an
E-12 (small) socket base, 15 Watt
rating.
To replace the top light bulbs:
1. Locate the two upper bulbs
inside the firebox at the top
(Figure 8).
2. Examine the bulbs to
determine which bulbs require
replacement.
3. Hold the socket while
unscrewing the bulb.
4. Hold the socket while
screwing in the new bulb.

glass Cleaning

The glass is cleaned in the factory
during the assembly operation.
During shipment, installation,
handling, etc., the clear door may
Figure 8
Log
Ember
bed
collect dust particles, these can
be removed by dusting lightly with
a clean dry cloth.
To remove fingerprints or other
marks, the clear door can be
cleaned with a damp cloth. The
clear door should be completely
dried with a lint free cloth to
prevent water spots. To prevent
scratching, do not use abrasive
cleaners or spray liquids on the
clear door surface.
Fireplace Surface
Cleaning
use a cloth dampened with
warm water only to clean painted
surfaces of the electric fireplace.
Do not use abrasive cleaners.
15