Listening To The Radio - Emerson Research iP100 Owner's Manual

OPERATING INSTRUCTIONS (CONTINUED)
L ISTENING TO THE RADIO
NOTE: To prevent any interference between your iPod and the radio in this unit,
your iPod should be switched 'Off' when listening to the radio.
R
1
Set the POWER button to the
'On' position, the display
lighting turns on.
4
1
Rotate the VOLUME control to
increase or decrease the
volume level. If you want to
increase the bass response
set the DBBS button to the
'On' positon.
Note: If you are listening to
music that contains heavy
bass at high volume levels the
sound may become distorted
if the DBBS switch is set to the
'On' position. If this occurs
set the DBBS switch to the
'Off' position, or reduce
the volume level.
2
Set the FUNCTION button to
the Radio position. The display
will change from time to radio
frequency. Set the BAND
selector to the desired band,
AM or FM Auto.
5
1
When you are finished listening
set the POWER button to the
'Off' position. The display
changes from radio frequency
to correct time and the display
lighting goes off.
9
R
3
Rotate the TUNING control
until the display shows the
desired AM or FM station
frequency. Turn the TUNING
control clockwise to select
higher numbered frequencies
or counter-clockwise to select
lower numbered frequencies.
The FM STEREO indicator will
light when you tune to an FM
Stereo station.