Flash (Bios/Vpd) Update Procedure - IBM NetVista Hardware Manual
Hardware maintenance manual for netvista 6266, 6270, 6276, 6279, 6280, and 6286 systems
Hide thumbs
Also See for NetVista:
- Hardware maintenance manual (211 pages) ,
- Guide utilisateur (124 pages) ,
- Benutzerhandbuch (122 pages)
Table of Contents
Advertisement
Flash (BIOS/VPD) update procedure
1. Power-off the computer.
Insert the flash update diskette into drive A.
2.
3. Power-on the computer.
4. When the Update Utility appears; select the country/keyboard, and then press Enter.
5. If the computer serial number was previously recorded, the number is displayed with an option to update it. Press Y to update the serial
number.
6. Type the 7-digit serial number of the computer you are servicing, then press Enter.
7.
Follow the instructions on the screen to complete the flash (BIOS/VPD) update procedure.
Attention: Refer to the information label located inside the system unit cover for any model-specific information.
34
Advertisement
Table of Contents
