Table of Contents
Advertisement
11) Note that RF Pass-Through Option will not be applicable if certain conditions have
been met. The conditions are shown as below:
a. The ML910 do not have RF Pass-Through installed. RF Pass-Through here is
refer to RF Antenna Switching Board.
b. The ML910 are being docked to either ML900 or ML910 Office Port Replicator.
12) Internal antenna will function if User selects the [RF Pass-Through Off] in the RF
Pass-Through Mode.
13) External antenna option will be available if User selects the [RF Pass-Through On] in
the RF Pass-Through Mode.
Expanding Your Computer
4-13
Advertisement
Table of Contents
