Table of Contents
Advertisement
5) Launch the ML User Application.
6) Select the RF Pass-Through option available in the MLUA.
7) Before the RF Pass-Through User Control in MLAA changed to [Enable], the RF
Pass-Through Control will be grey-out.
8) After the RF Pass-Through User Control in MLAA had being [Enable], the default
setting will be [Automatic Selection].
9) User can select [Manual Selection] to either Enable or Disable the RF Pass-Through.
[Apply] need to be press by User in order to make the selection valid.
10) Enable the RF Pass-Through will be disabling the Internal Antenna and vice-versa.
4-12
1
3
2
4
Expanding Your Computer
Advertisement
Table of Contents
