Power Source; Battery Operation; Battery Replacement - Emerson HD7096A Owner's Manual

Personal cd, cd-r/rw player with 60 second joggable anti-skip protection
Table of Contents

Advertisement

This CD player can be operated on either 120V 60Hz AC house current with an
optional AC adapter (not included) or on 3V DC (2 "AA" batteries, not included).

BATTERY OPERATION

1.) Open the battery compartment door on
the bottom cabinet by sliding it in the
direction of the arrow and then lifting it
open. To prevent loss, the door cannot
be removed from the unit.
2.) Insert 2 "AA" batteries (not included) into
the compartment. Use alkaline batteries
for longest life. Follow the polarity
markings inside the compartment. If the batteries are inserted incorrectly the
unit will not work.
NOTE:
In order to operate the player on batteries the optional AC adapter (not included)
must be disconnected from the DC IN jack.

BATTERY REPLACEMENT

When the batteries become too weak the battery level indicator "
flash and operation may become erratic. When this occurs replace the batteries
immediately.
Follow these precautions when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery
compartment. Reversed batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-Zinc) or old batteries
with fresh ones.
4. If the device is not to be used for a long period of time, remove the batteries to prevent
damage or injury from possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture
(Follow battery manufacturer' s directions.)
HD7096A_7099A_071403.p65

POWER SOURCE

BATTERY PRECAUTIONS
5
5
" begins to
14/7/2003, 10:34

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hd7099a

Table of Contents