Related Manuals for Emerson HD7100
Summary of Contents for Emerson HD7100
- Page 1 PERSONAL CD, CD-R/RW PLAYER with 45 SECOND ELECTRONIC ANTI-SKIP PROTECTION and DIGITAL AM/FM TUNER OWNER’ S MANUAL HD7100 Visit our web site at www.emersonradio.com HD7100_ib_0422.p65 22/4/2002, 11:43...
- Page 2 Thank you... For purchasing this Emerson Personal CD Player with AM/FM DIGITAL TUNER. The CD player has a 24 track programmable memory so you can listen to the songs on your favorite CD's in any order you choose. Or you can use the Random playback feature and let the player select the playback order for you.
-
Page 3: Important Notes
IMPORTANT NOTES WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. Avoid installing the unit in locations described below: • Places exposed to direct sunlight or lose to heat radiating appliances such as electric heaters. CLASS 1 LASER PRODUCT CLASS 1 LASER PRODUCT APPAREIL Á... -
Page 4: Location Of Controls And Indicators
2.) VOLUME Control – Raises or lowers the volume. 3.) PHONES Jack – Connect stereo headphones, included, to this jack. 4.) LINE OUT Jack – To connect this CD player to an external amplifier or recording device. Connection cable not included. -
Page 5: Lcd Display Indicators
LCD DISPLAY INDICATORS 1.) FM/AM (Radio Band) Indicators. 2.) Track Number Display – Shows the track which is being played, and the total tracks on the disc. 3.) PROG (Program) Indicator – Appears when programming tracks or playing programmed tracks. 4.) PRESET (Radio Station Memory) Indicator. -
Page 6: Power Source
POWER SOURCE This CD player can be operated on either 120V 60Hz AC house current with an optional AC adapter (not included) or on 3V DC (2 "AA" batteries, not included). BATTERY OPERATION 1.) Open the battery compartment door on... - Page 7 AC OPERATION (AC Adapter not included) Connect the AC adapter to your 120V AC outlet. Then connect the small plug to the "DC IN 4.5V" jack on the back of the player as shown in the following illustration. NOTE: This optional AC adapter, should be rated as follows: Input : 120V / 60Hz AC.
-
Page 8: Normal Playback
OPERATING INSTRUCTIONS NORMAL PLAYBACK 1.) Connect the headphones to the PHONES jack. Set the VOLUME control to a low level before you begin playback. Set the FUNCTION switch to CD position. 2.) Slide the CD Door OPEN switch to the right to release the lock and open the CD Door. -
Page 9: Pause Control
PAUSE CONTROL Press the Play/Pause button during playback to pause momentarily. The sound stops, the track and the time display flashes but the disc continues to spin. Press the Play/Pause button again to cancel pause and resume playback. The sound returns and the display stops flashing. -
Page 10: Intro Scan
RANDOM PLAYBACK Use Random playback to play all the tracks on a disc in a random order selected by the CD player. 1.) Press Play/Pause button to begin playback. 2.) When playback begins press the MODE button 4 times until the “RAND”... -
Page 11: Programmed Playback
PROGRAMMED PLAYBACK You can program the player to play only the tracks that you want to hear, in the specific order that you want to hear them. Up to a total of 24 tracks can be programmed. You may program certain tracks to play more than once if desired. IMPORTANT: The player can only be programmed when it is in the Stop mode and the total number of tracks and playing time appear on the display. - Page 12 ELECTRONIC ANTI-SKIP PROTECTION This CD player is equipped with an automatic 45 second Electronic Anti-Skip Memory and an Anti-Rolling Mechanism that will eliminate virtually all skipping during most active uses. When you press the Play/Pause button to begin playback the player immediately begins to store 45 seconds of music in a solid state memory that is impervious to shock.
-
Page 13: Listening To Radio
FM stations. Make sure that the headphone cable is unwound completely in order to provide the best reception. AM – The AM antenna is located inside the cabinet of the CD player. If AM reception is weak, try changing the position of the CD player itself until the internal antenna is pointing in the general direction of the radio transmitter. - Page 14 PRESETTING STATIONS IN MEMORY Up to 10 AM and 10 FM stations can be stored into the Preset memories. They will remain in memory as long as the batteries are installed. 1.) Slide the FUNCTION switch to RADIO position. 2.) Press the BAND button to select AM or FM band, press the tune a station.
- Page 15 You can connect this CD player to a home stereo system, receiver, amplifier, or recorder if desired. Connect the LINE OUT jack of this CD player to the Left/Right Auxiliary Inputs, Line Inputs, or Record Inputs of the external device. The connection cable is NOT included.
-
Page 16: Care And Maintenance
CARE AND MAINTENANCE CLEANING THE CABINET Wipe with a soft cloth. If the cabinet is very dirty, dampen the cloth with a weak solution of neutral detergent and water, and then wipe clean. CLEANING THE LENS A dirty lens will cause sound skipping and, if the lens is very dirty, the CD may not work. -
Page 17: Troubleshooting Guide
Replace batteries. Try another disc. Clean or replace disc. Set FUNCTION switch to RADIO position. Extend headphone cord fully. reception is obtained. SERVICE PLEASE CALL: 1-800-898-9020 Emerson Radio Corp. Consumer Affairs Dept. 1901 Diplomat Drive, 22/4/2002, 11:43... -
Page 18: Limited Warranty
EMERSON RADIO CORP. LIMITED WARRANTY What does this warranty cover ? Any manufacturing defects in original material, including original parts and workmanship, under normal use and conditions. For how long? For a period of ninety (90) days from the date of original purchase in the U.S. - Page 19 EMERSON RADIO CORP. EMERSON PART NO. :16-2863 PRINTED IN CHINA 204-01 HD7100_ib_0422.p65 22/4/2002, 11:43...