Table of Contents
Advertisement
Getting Started with the User Interface
Settings and Diagnostics
2
Click the Graph and Chart Settings tab.
3
Select 3D to specify whether you want the graph on the dashboard to be displayed as a
three-dimensional graph.
4
Select or deselect Draw transparent to specify whether the bars in a three-dimensional
bar graph must appear transparent or solid.
NOTE:
A solid bar will hide part of any bar behind it. A transparent bar allows you to look
through it and see other transparent bars behind it.
5
Select Anti-alias to specify whether you want to use anti-aliasing techniques while
displaying pie charts. If anti-aliasing is used, you will see smoother curves in pie charts. If
anti-aliasing is not used, pie chart curves appear jagged.
6
Select Explode pie to specify whether the segments must remain within the circle of the
pie chart or be displayed with some distance between each segment.
7
In Pie angle (degrees), specify the angle to use when drawing pie charts.
Diagnostics
You can use Diagnostics to specify the level of debug logging required, the maximum size of
debug files, and where they should be saved. You can configure the error reporting service
settings and specify which events should be captured in the product log and event log by
specifying the product log's location, name, size limits, and time-out settings.
1
Click Settings & Diagnostics | Diagnostics. The Diagnostics page displays the Debug
Logging tab by default.
2
From the Level drop-down menu, specify the type of information that must be captured in
the Debug log. You can select:
• High — to collect detailed level of log entries.
• Medium — to collect adequate logs.
• Low — to collect minimum set of logs.
• None — to disable debug logging.
3
Select Limit size of debug log files to specify if you want a size limit for debug log files,
then specify how large (in megabytes or kilobytes) the debug log files can be.
NOTE:
Selecting this option consumes your hard disk space.
4
Select Specify location for debug log files to specify a location for debug files. Select
any of the following options from the drop-down list and specify the location accordingly:
• <Desktop>\
• <Install Folder>\
• <System Drive>\
• <Program Files>\
• <Windows Folder>\
• (Full Path)
5
Click the Error Reporting Service tab.
6
Select Enable to turn on the error reporting service.
7
Select Catch exceptions to capture information about exceptional events such as system
crashes.
McAfee Security for Microsoft SharePoint version 2.5 User Guide
47
Advertisement
Table of Contents
