Connecting Your Tv With No Hdmi Input - Pioneer Elite VSX-43 Operating Instructions Manual

2
2

Connecting your TV with no HDMI input

This diagram shows connections of a TV (with no HDMI input)
and DVD player (or other playback component) to the receiver.
• With these connections, the picture is not output to the TV
even if the DVD player is connected with an HDMI cable.
Connect the DVD player's video signals using a composite
cable.
• In order to listening to HD audio with this receiver, connect
an HDMI cable, and use analog video cable for video signal
input.
Depending on the player, it may not be possible to output
video signals to both HDMI and other video output
(composite, etc.) simultaneously, and it may be necessary
to make video output settings. Please refer to the operating
instructions supplied with your player for more information.
Important
• When the receiver and TV are connected by composite
cable, the OSD function allowing display of the receiver's
settings, operations, etc., on the TV's screen cannot be
used. In this case, watch the receiver's front panel display
while performing the various operations and making
settings.
Note
• In order to listen to the audio from the TV that is connected
to this receiver using a analog audio cables, set-up for
analog audio input is required (see The Input Assign menu
on page 51).
• Only one component can be connected to both the optical
input terminal and coaxial input terminal. If connecting
other devices, please use a different method to connect the
audio.
In order to listen to the audio from the source component
that is connected to this receiver using an optical cable or
a coaxial cable, first, switch to the DVD (DVD player) or
SAT/CBL (set-top box), then use
RECEIVER
to choose the audio signal O1 (OPTICAL1) or C1
SEL
Selecting the audio input signal on
(COAXIAL1) (see
page 25).
VIDEO OUT
ANALOG AUDIO OUT
R
and
SIGNAL
DVD player
Select one
VIDEO OUT
DIGITAL AUDIO OUT
HDMI OUT
COAXIAL OPTICAL
L
HDMI
DVD IN
MONITOR
OUT
DVD IN
ANALOG
IN1 (CD)
SAT/CBL IN
VIDEO IN
TV
18
Connecting your equipment
Set-top box
Select one
ANALOG AUDIO OUT DIGITAL AUDIO OUT
COAXIAL OPTICAL
R L
OPTICAL
IN1 (TV)
COAXIAL
IN1 (CD)
This connection is
required in order to
listen to the sound
of the TV over the
receiver.
R L
OPTICAL
ANALOG AUDIO OUT DIGITAL AUDIO OUT
Select one
4
7
62