Table of Contents
Advertisement
Remote Control Battery
The remote control requires one "button-type" 3-volt Lithium
battery, included. To extend the life of the original battery
we have inserted a small clear plastic spacer tab between
the lithium battery and the battery terminal.
You must remove this battery spacer tab before you can
use the remote control.
To remove the tab, pull it in the direction of the arrow in the
illustration as shown.
W hen the operation of the remote control becomes
intermittent or unsatisfactory, replace the original battery
with a new 3-volt Lithium battery.
The battery number is CR2025 or equivalent.
1.) To replace the battery, slide the battery holder out of the
remote control in the direction of ' arrow' .
2.) Remove the original battery from the holder and install a
new CR2025 battery with the "+" side facing up as shown
in the illustration. Then slide the battery holder back into
the remote control.
Dispose of the original battery properly. It should not be thrown into a
fire as the battery may explode if incinerated. It should not be left around
where small children or pets might play with, or swallow it.
If the battery is accidentally swallowed, contact a physician immediately.
PD3689_062005.p65
12
12
P O W E R
A U X
T I M E R
S L E E P
FUNCTION S T O P PLAY/PAUSE
SKIP/TUNING
REPEAT
INTRO
R A N D O M
T U N E R / B A N D
M U T E
E Q
DBBS
Remove
before use
Remueva
antes de
usar
POWER
AUX
TIMER
SLEEP
FUNCTION STOP PLAY/PAUSE
RANDOM
SKIP/TUNING
REPEAT
INTRO
TUNER/BAND
MUTE
EQ
DBBS
1
2
Lithium Cell
CR2025
3V
20/6/2005, 16:18
Advertisement
Table of Contents
