Charging The Battery; Micro Sd - Emerson EMP313-4 User Manual

CHARGING THE BATTERY

Your MP3 Player has an integrated rechargeable Li-ion battery. It is recommended to fully charge the player before using it for the first time.
Recharge the battery by connecting the player to a computer using the included USB 2.0 cable.
Charging time is between 3-5 hours, depending if the player is powered off or working. To keep the battery in good condition, we recommend not
charging it for more than 8 hours.
Battery level indication:
Full Two-thirds full Half full Low Empty
Important:
● Fully charge it before you use the player for the first time or when you haven't used it for a long time.
● Charge the player immediately when the "Low battery" message is displayed.
● Do not over charge or discharge the player. Over charging or discharging will shorten the battery life.
● The battery could be over discharged if the player is not used for a long time (over three months). To avoid over discharge, fully charge the player
every three months and always keep the voltage of the battery above 50 %.

MICRO SD

Micro SD
Add up to
8 GB
of memory
The player includes a Micro SD card slot that enables you to add up to 8 GB of additional memory to your player.
1. Insert the Micro SD card into the card slot with the metallic contacts facing towards the front of the player, and
gently push it in until it clicks.
Micro SD card, select "SD Card" from the main menu, and press the [
2. To access the
3. Use the [ ] or [ ] buttons to select a file or folder, and press the [
view the file.
4. To remove the card, gently push it in until it pops out.
Note: ● Do not use force while inserting the memory card
● Do not remove the card during data transfers
] button.
] button to open the folder, or play/
9