Table of Contents
Advertisement
Programmed Playback
The Programmed Playback feature allows you to program a total of up to 64 tracks
in any desired order. You may program the same track to play several times within
a program sequence if desired.
Note: You cannot program tracks during playback. If a disc is playing press
the
STOP button first to stop playback before beginning the programming
steps below.
1.) Load the disc in the player and wait until the player has read the Table of Contents
of the disc.
2.) Press the PROGRAM/CLOCK button on the remote control.
The PRG indicator, Program Memory "P- 01" and
Track "00" will appear in the display .
3.) Then press the
to select the first track on the disc to be
programmed.
(Example: Track 07).
4.) Press the PROGRAM/CLOCK button again to
enter Track 07 in program memory #01.
The program memory number advances to "P- 02".
5.) Repeat steps 3 and 4 selecting the desired Track number each time until you
have entered up to 64 tracks in the CD program memory.
PD3689_062005.p65
or
SKIP/TUNING buttons s
25
25
20/6/2005, 16:18
Advertisement
Table of Contents
