SM 1619P03217 04-09:SM 1619P03217 04-09 4/20/09 9:14 AM Page 2 General Power Tool Safety Warnings Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE The term “power tool”...
Risk of injury to user. The power cord must only Do not use AC only rated tools with a DC be serviced by a Skil Factory Service Center or power supply. While the tool may appear to Authorized Skil Service Station.
Page 4
SM 1619P03217 04-09:SM 1619P03217 04-09 4/20/09 9:14 AM Page 4 Safety Rules for Drills Wear ear protectors with impact drills. If the bit becomes bound in the Exposure to noise can cause hearing loss. workpiece, release trigger immediately, reverse the direction of Use auxiliary handles supplied with the rotation and slowly squeeze the trigger to tool.
Page 5
SM 1619P03217 04-09:SM 1619P03217 04-09 4/20/09 9:14 AM Page 5 Symbols IMPORTANT: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer.
SM 1619P03217 04-09:SM 1619P03217 04-09 4/20/09 9:14 AM Page 6 Functional Description and Specifications Disconnect the plug from the power source before making any assembly, adjustments or changing accessories. Such preventive safety measures reduce the risk of starting the tool accidentally. Drill NR = Not recommended ATTENTION: 3/8 inch drills are not recommended for running lag bolts...
SM 1619P03217 04-09:SM 1619P03217 04-09 4/20/09 9:14 AM Page 7 Operating Instructions TRIGGER “ON-OFF” SWITCH to increase the speed and release pressure to (Model 6132 only) decrease speed (Fig. 1). To turn tool “ON”, squeeze the trigger switch. REVERSING SWITCH LEVER To turn the tool “OFF”, release the trigger The reversing switch lever is located above the switch which is spring loaded and will return to...
Page 8
SM 1619P03217 04-09:SM 1619P03217 04-09 4/20/09 9:14 AM Page 8 Operating Tips You will extend the life of your bits and do faster in the long run. Maintain enough neater work if you always put the bit in pressure to assure that the bit does not just contact with the work before pulling the spin in the hole.
Always wear safety goggles when by a Skil Factory Service Center or Autho- cleaning tools with compressed air. rized Skil Service Station. Ventilation openings and switch levers must be kept clean and free of foreign matter.
Authorized Skil Service Center or Service Station.) 3. Inspect cord for damage. If damaged, have cord replaced by an Authorized Skil Service Center or Service Station.
Page 11
SM 1619P03217 04-09:SM 1619P03217 04-09 4/20/09 9:14 AM Page 11...
Page 12
SM 1619P03217 04-09:SM 1619P03217 04-09 4/20/09 9:14 AM Page 12...
Page 13
SM 1619P03217 04-09:SM 1619P03217 04-09 4/20/09 9:14 AM Page 13...
Page 14
SM 1619P03217 04-09:SM 1619P03217 04-09 4/20/09 9:14 AM Page 14...
Page 15
SM 1619P03217 04-09:SM 1619P03217 04-09 4/20/09 9:14 AM Page 15...
Page 16
SM 1619P03217 04-09:SM 1619P03217 04-09 4/20/09 9:14 AM Page 16...
Page 17
SM 1619P03217 04-09:SM 1619P03217 04-09 4/20/09 9:14 AM Page 17...
Page 18
SM 1619P03217 04-09:SM 1619P03217 04-09 4/20/09 9:14 AM Page 18...
Page 19
SM 1619P03217 04-09:SM 1619P03217 04-09 4/20/09 9:14 AM Page 19...
Page 20
SM 1619P03217 04-09:SM 1619P03217 04-09 4/20/09 9:14 AM Page 20...
Page 21
SM 1619P03217 04-09:SM 1619P03217 04-09 4/20/09 9:14 AM Page 21...
Page 22
SM 1619P03217 04-09:SM 1619P03217 04-09 4/20/09 9:14 AM Page 22...
Page 23
SM 1619P03217 04-09:SM 1619P03217 04-09 4/20/09 9:14 AM Page 23...
Page 24
SM 1619P03217 04-09:SM 1619P03217 04-09 4/20/09 9:14 AM Page 24...
Page 25
SM 1619P03217 04-09:SM 1619P03217 04-09 4/20/09 9:14 AM Page 25...
Page 26
SM 1619P03217 04-09:SM 1619P03217 04-09 4/20/09 9:14 AM Page 26...
Page 27
SM 1619P03217 04-09:SM 1619P03217 04-09 4/20/09 9:14 AM Page 27...
Page 28
SM 1619P03217 04-09:SM 1619P03217 04-09 4/20/09 9:14 AM Page 28...
Page 29
SM 1619P03217 04-09:SM 1619P03217 04-09 4/20/09 9:14 AM Page 29...
Page 30
SM 1619P03217 04-09:SM 1619P03217 04-09 4/20/09 9:14 AM Page 30...
Page 31
SM 1619P03217 04-09:SM 1619P03217 04-09 4/20/09 9:14 AM Page 31...
Page 32
SM 1619P03217 04-09:SM 1619P03217 04-09 4/20/09 9:14 AM Page 32 1619P03217 04/09 Printed in China...