Sirius Satellite Radio XM Snap User Manual page 37

To replace an FM preset assigned to a number button:
1 Press FM on the top of Snap . The FM icon is displayed on the screen to indicate the Radio is
in FM mode, and the display will show the current FM channel .
2 Turn the Rotary knob to tune to the desired FM channel .
3 Press and hold the number button between 1-5 that corresponds to the FM channel you
want to replace . The message Replace? Press Again will be displayed on the screen .
4 Press the number button again . The corresponding number icon will
be displayed on the screen confirming that the new FM preset has
replaced the old FM preset .
5 To exit, press FM or wait 10 seconds until Snap exits to the main
display screen .
IMPORTANT! You need to ensure that your vehicle's FM radio is tuned to the same FM channel .
TIP! Be sure to complete any FM functions while the FM icon is displayed on the screen .
TIP! To configure your preset FM channels, you need to find available FM channels in your area . Follow
step 1 in "Option 3: PowerConnect Installation Instructions" on page 25 to find available FM channels
FM
Replace?
Press Again
37