Sirius Satellite Radio XM Snap User Manual page 17

Table of Contents

Advertisement

around the door opening . Lift the weather stripping from
the opening and tuck the cable inside it, then replace the
weather stripping . Run the cable inside of the weather
stripping to the bottom of the door opening . Hide the
antenna wire inside the cabin . Pull the cable out of the
weather stripping at the bottom of the door opening and
route it under the carpet toward the cigarette lighter power
adapter socket . Coil any excess cable in a hidden location,
such as under the carpet, keeping it away from any vehicle
pedals or controls . Secure the excess cable with wire ties .
TIP: Always be careful to include enough slack in your
routing to accommodate open doors or the hood lid . Use
electrical tape to secure the cable in areas
so that hinges do not pinch the cable with
the door .
Plug the Magnetic Mount Antenna connector into
the ANTENNA connector on the Base of Snap .
The antenna plug and cable will fit into the recess
on the top of the Base .
Antenna
Plug
AUDIO
FM
Place Antenna
Closer to A-Pillar
if Cable Doesn't Reach
Center of Roof
Cigarette Lighter
or Power Adapter
Socket Location
Antenna
Connector
17

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xsn1v1Xm snap xsn1

Table of Contents