1. Manuals
  2. Brands
  3. SIIG Manuals
  4. Controller
  5. UltraATA 133 PCI
  6. Quick installation manual

SIIG UltraATA 133 PCI Quick Installation Manual

Hide thumbs Also See for UltraATA 133 PCI:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Quick Installation Manual
UltraATA 133 PCI

Quick Installation Guide

Introducing the UltraATA 133 PCI
The UltraATA 133 PCI is an ultra high-speed dual channel Ultra
ATA/133 controller board for use in Pentium-class computer. With
full support specified in ATA/ATAPI-6, it achieves burst data
transfer rates up to 133MB/sec and supports drive capacities greater
that 137GB.
Features and Benefits
• Compliant with Ultra ATA/133 specifications and PCI v2.2/
2.1 Plug-n-Play
• Provides two independent Ultra ATA channels (built-in 128-
byte FIFOs per channel) for faster data transfer
• Full ACPI power management support
• Supports Ultra DMA 0, 1, 2, 3, 4, 5, 6 and Multi-word DMA 0,
1, 2
• Breaks the 137GB barrier! Supports hard drives larger than
137GB
• Coexists with on-board IDE controller
• CRC (Cyclical Redundancy Check) error-checking provides
data verification and achieves flawless data tranfer
• Flash BIOS for easy upgrade
• Achieves burst data transfer rates up to 133MB/sec
• Works with various brands of Ultra ATA 133/100/66/33 hard
disk drives and ATAPI devices including CD-ROM, CD-R/
RW, DVD-ROM, and zip drives
System Requirements
• Pentium-class computer with one available PCI slot
• Windows 95B or later
04-0233A
1

Advertisement

Table of Contents
loading

Related Manuals for SIIG UltraATA 133 PCI

Summary of Contents for SIIG UltraATA 133 PCI

  • Page 1: Quick Installation Guide

    UltraATA 133 PCI Quick Installation Guide Introducing the UltraATA 133 PCI The UltraATA 133 PCI is an ultra high-speed dual channel Ultra ATA/133 controller board for use in Pentium-class computer. With full support specified in ATA/ATAPI-6, it achieves burst data transfer rates up to 133MB/sec and supports drive capacities greater that 137GB.

  • Page 2: Hardware Installation

    Package Contents • UltraATA 133 PCI board • Driver diskette • 40-pin/80-wire Ultra ATA cable • This quick installation guide • One 5-year warranty card Hardware Installation General instructions for installing the card are provided below. If needed, please refer to your computer’s reference manual for more information.

  • Page 3: Device Connection

    Device Connection The UltraATA 133 PCI is a dual channel Ultra ATA/133 controller that supports up to four IDE hard disk drives or ATAPI devices. If you plan to use the second IDE channel (IDE2), you will need to purchase another 40-pin/80-wire Ultra ATA ribbon cable. In order to achieve high-speed data transfer, a 40-pin/80-wire Ultra ATA ribbon cable is recommended.

  • Page 4: Software Installation

    Software Installation This section provides information on how to install the UltraATA 133 PCI drivers for the following operating systems: New & Existing Windows 95B New & Existing Windows 98 New & Existing Windows ME New & Existing Windows NT 4.0 New &...
  • Page 5 Verify Proper Installation for Windows 95B 1. Double click My Computer/Control Panel/System, then click Device Manager. 2. Double click hdc; IDE dev, an entry, SIIG CN2487 UDMA133 IDE Controller, should be listed. 3. Highlight SIIG CN2487 UDMA133 IDE Controller and click Properties.
  • Page 6 5. Remove the Driver diskette and restart Windows to complete driver installation. Verify Proper Installation for Windows 98/98SE/ME 1. Right-click My Computer, then click Properties. Click Device Manager tab. 2. Double click Hard Disk Controllers, an entry, SIIG CN2487 UDMA133 IDE Controller should be listed.
  • Page 7 3. Press S, select Other, then press Enter. 4. Insert the Driver diskette and press Enter. 5. Select SIIG CN2487 UDMA133 IDE NT miniport Driver and press Enter. 6. Press Enter to continue and follow on-screen instructions to complete Windows NT 4.0 installation.
  • Page 8 2. At the Windows Set-up screen, press F6 to specify and add the driver. 3. Insert the Driver diskette. Press S, then press Enter. 4. Select SIIG CN2487 UDMA133 IDE Win2000 Miniport Driver and press Enter. 5. Press Enter to continue and follow on-screen instructions to complete installation.

  • Page 9: Bios Configuration

    4. Select SIIG CN2487 UDMA133 IDE WinXP Miniport Driver and press Enter. 5. Press Enter to continue and follow on-screen instructions to complete Windows XP installation. Note: When the Software Installation warning pops up, click Yes. And when the Hardware Installation warning pops up, click Yes again.
  • Page 10 Empty page...

  • Page 11: Technical Support

    RMA number posted on the outside of the shipping carton. Step 3: Ship the Product You are responsible for the cost of shipping back to SIIG at the following address: SIIG, Inc.
  • Page 12 Fremont, CA 94538-3152 UltraATA 133 PCI is a trademark of SIIG, Inc. SIIG and SIIG logo are registered trademarks of SIIG, Inc. Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation. Pentium is a registered trademark of Intel Corporation. Other names used in publication are for identification only and may be trademarks of their respective companies.

Table of Contents