SIIG UltraATA 133 PCI Quick Installation Manual
Hide thumbs
Also See for UltraATA 133 PCI:
- Quick installation manual (36 pages) ,
- User manual (26 pages) ,
- Quick installation manual (16 pages)
Advertisement
Quick Links
UltraATA 133 PCI
Quick Installation Guide
Introducing the UltraATA 133 PCI
The UltraATA 133 PCI is an ultra high-speed dual channel Ultra
ATA/133 controller board for use in Pentium-class computer. With
full support specified in ATA/ATAPI-6, it achieves burst data
transfer rates up to 133MB/sec and supports drive capacities greater
that 137GB.
Features and Benefits
• Compliant with UltraDMA6 ATA/133 specifications
• Compliant with PCI v2.2 Plug-n-Play
• Provides two independent Ultra ATA channels (built-in 256-
byte FIFOs per channel) for faster data transfer
• Full ACPI power management support
• Supports Ultra DMA 0-6 and Multi-word DMA 0-2
• Breaks the 137GB barrier! Supports hard drives larger than
137GB
• Coexists with on-board IDE controller
• CRC (Cyclical Redundancy Check) error-checking provides
data verification and achieves flawless data tranfer
• Flash BIOS for easy upgrade
• Achieves burst data transfer rates up to 133MB/sec
• Works with various brands of Ultra ATA 133/100/66/33 hard
disk drives and ATAPI devices including CD-ROM, CD-R/
RW, DVD-ROM, and zip drives
System Requirements
• Pentium-class computer with one available PCI slot
• Windows 98 SE/ME/NT 4.0/2000/XP
04-0233B
1
Advertisement
Related Manuals for SIIG UltraATA 133 PCI
Summary of Contents for SIIG UltraATA 133 PCI
- Page 1 UltraATA 133 PCI Quick Installation Guide Introducing the UltraATA 133 PCI The UltraATA 133 PCI is an ultra high-speed dual channel Ultra ATA/133 controller board for use in Pentium-class computer. With full support specified in ATA/ATAPI-6, it achieves burst data transfer rates up to 133MB/sec and supports drive capacities greater that 137GB.
-
Page 2: Hardware Installation
Package Contents • UltraATA 133 PCI board • Driver diskette • 40-pin/80-wire Ultra ATA cable • This quick installation guide • One 5-year warranty card Hardware Installation General instructions for installing the card are provided below. If needed, please refer to your computer’s reference manual for more information. - Page 3 Device Connection The UltraATA 133 PCI is a dual channel Ultra ATA/133 controller that supports up to four IDE hard disk drives or ATAPI devices. If you plan to use the second IDE channel (IDE2), you will need to purchase another 40-pin/80-wire Ultra ATA ribbon cable.
-
Page 4: Software Installation
Software Installation This section provides information on how to install the UltraATA 133 PCI drivers for the following operating systems: New & Existing Windows 98 SE New & Existing Windows ME New & Existing Windows NT 4.0 New & Existing Windows 2000 New &... - Page 5 Windows ME Driver Installation For New Windows ME Installation 1. Install the board and follow Microsoft procedures to install Windows ME accordingly. 2. Once Windows has been installed, right click My Computer, then click Properties. Select Device Manager tab. 3. Double click PCI Mass Storage Controller listed under Other Devices.
- Page 6 Windows NT 4.0 Driver Installation For New Windows NT 4.0 Installation 1. Install the board and follow Microsoft procedures to install Windows NT 4.0 accordingly. 2. At the Windows Setup screen, press F6 to specify and add the driver. 3. Press S, select Other, then press Enter. 4.
- Page 7 Windows 2000 Driver Installation For New Windows 2000 Installation 1. Install the board and follow Microsoft procedures to install Windows 2000 accordingly. 2. At the Windows 2000 Setup screen, press F6 to install the driver. 3. Insert the driver diskette. Press S, then press Enter. 4.
- Page 8 Bios Configuration The UltraATA 133 PCI BIOS will appear everytime your system starts up. If the bios doesn't show, please try your controller in another PCI slot. During this (Post) process, the bios will show up...
- Page 9 RMA number posted on the outside of the shipping carton. Step 3: Ship the Product You are responsible for the cost of shipping back to SIIG at the following address: SIIG, Inc.
-
Page 10: Fcc Compliance Statement
Fremont, CA 94538-3152 UltraATA 133 PCI is a trademark of SIIG, Inc. SIIG and SIIG logo are registered trademarks of SIIG, Inc. Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation. Pentium is a registered trademark of Intel Corporation. Other names used in publication are for identification only and may be trademarks of their respective companies.