Lightolier Calculite 7052QD Specification

Page 1 of 2
Top View
Flush Trim White Trim Ring
Ceiling Cutout: 9 1/4" (235 mm) Dia.
Catalog Number
7052QD Matte White Finish
Features
1. Housing: Spun 16 ga. aluminum separates from frame for inspection
through aperture.
2. Lampholder: Die-formed steel yoke with mini-can socket, 18 SF1 leads to
J-box.
3. Mounting Brackets: Adjust vertically from inside of fixture. Durable 16 ga.
steel construction. Use with standard 3/4" or 1 1/2" lathing channels, or 1/2"
(11/16" O.D.) EMT pipe (by others) or Lightolier accessory mounting bars.
4. Face Plate: Die-formed steel 20 ga. with integral cone, matte white baked
enamel.
5. Aperture Cone: Designed to minimize glare and reduce brightness at ceiling
plane.
6. Molded Trim Ring: Provides minimum width white flange in dry or plaster
ceiling.
7. Horizontal Locking Device: Provides locking of horizontal rotation. Optical
assembly rotates up to 358°.
8. Mounting Frame: Die-cast aluminum, suitable for dry or plaster ceilings.
9. Locking Device: Allows removal of optical system for relamping without
disturbing shutter position.
10. Vertical Locking Device: Locks optical assembly which may be adjusted
from 0° to 45°.
11. Focusing Lens: System provides hard or softened edge image projection.
12. Shutters: Four spring shutters with porcelain hand knobs allow for adjust-
ment by cut-off of edge of light beam. Internal clips hold 2" square or round
templates (included).
13. Junction Box: 14 ga. steel, 4" x 3" x 2" box allows inspection from below.
14. Thermal Protector: Meets NEC and UL requirements. Insulation must be
kept 3" away from fixture sides and wiring compartments and must not be
placed above fixture in a manner which will entrap heat.
Calculite ® Incandescent Adjustable Accent
2
7 7/8"
3"
1" min.-
1 7/8" max.
(Ceiling Runner)
3 4 9
9 3/16"
Flush
Lamp
T-4 100W
Clear Tungsten Halogen, Mini-Can Base, 120V
4 1/4" Aperture T4 Clear T. H. Framing Projector
1 11 12
4 1/8: Dia .
10
Aperture
9 15/16"
Overlap
Accessories and Options
18" Mounting Bars 1950 (set of 2)
27" Mounting Bars 1951 (set of 2)
T-Bar Anchor Clips 1956 (set of 4, for 1950 & 1951 bars)
Wood Joist Mtg. Bars 7994 (set of 2)
Step Down Transformer 7997 (277V primary 1.1 amp/120V secondary,
300W capacity)
Electrical
UL Listed for maximum of 8 No. 12, 75°C through branch circuit supply conduc-
tors, or 60°C supply conductors for end of run.
Labels
UL Listed for damp locations, I.B.E.W.
Job Information
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier
a Genlyte Thomas Company
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division) • A0902
7052QD
13
14
3/4" max.
Ceiling
Thickness
5 6 7 8
Type:
www.lightolier.com