Seiko V072 Instructions Manual page 15

ALARM
[ALARM TIME SETTING]
When the time function is displayed in the 24-hour indication, the alarm is also displayed in the 24-hour
indication.
The flashing digits move quickly if button C is kept pressed.
When setting the hour digits in the 12-hour indication, check that AM/PM is properly set.
If the watch is left untouched in the ALARM SETTING display with the digits flashing, it will
automatically return to the ALARM mode in 1 to 2 minutes.
The alarm can be tested by keeping buttons B and C pressed at the same time in the CALENDAR or
TIME mode.
STOPWATCH
With each press of button C, the light illuminates the digital display with a beep.
After measuring 60 minutes, the stopwatch will start counting again from "00'00"oo" as many times
as necessary until it is stopped.
When measuring a long period of time, press button A to return the STOPWATCH mode to the
CALENDAR or TIME mode after the stopwatch starts. This will prevent any possible malfunction.
15