Samsung SyncMaster VC240 User Manual page 41

MENU
Mode
Contrast
Brightness
Sharpness
Color
Tint (G/R)
Picture Option
Picture Reset
Network
The network menu is disabled while on the line.
MENU
IP Settings
User Name
Phone Number
Network Preference
Using the product
Select a pre-set screen mode for the monitor or change the screen settings to suit your preferences.
• <Dynamic>
Select this mode to view a sharper image than in <Standard> mode.
• <Standard>
Select this mode when the surroundings are bright. This also provides a sharp image.
• <Movie>
Select this mode when the surroundings are dark. This will save power and reduce eye fatigue.
Adjusts the Contrast.
Adjusts the Brightness.
Adjusts the Sharpness.
Adjusts color saturation of the picture.
Adjusts the color tint of the picture.
• <Color Tone> - The tone of the color can be changed.
• <Cool2> - <Cool1> -<Normal> - <Warm1> - <Warm2>
<Warm1> and <Warm2> can only be selected when <Mode> is set to <Movie>.
• <Digital NR> - Digital Noise Reduction.
• <Off> - <Low> - <Midium> - <High> - <Auto>
Picture parameters are replaced with the factory default values.
• <Reset Picture Mode> - <Cancel>
Configure the IP address.
• <Dynamic> - Allocates a dynamic IP address.
• <Static> - Allocates a static IP address.
Set the user name that will be used to logon to the SIP server or H.323 Gatekeeper.
Set the phone number that will be used to make a call as an E.164 address to be sent to the H.323
Gatekeeper.
Select the basic protocol to be used during a call.
DESCRIPTION
DESCRIPTION
3-8