Cautions For Use - Panasonic Viera Link HX-WA10 Owner's Manual

CAUTIONS FOR USE

About the camera
The camera and the SD card
become warm during use.
This is normal and is not a
malfunction.
Keep this unit as far away as
possible from electromagnetic
equipment (such as microwave
ovens, TVs, video games etc.).
i If you use this unit on top of or
near a TV, the pictures and/or
sound on this unit may be
disrupted by electromagnetic
wave radiation.
i Do not use this unit near cell
phones because doing so may
result in noise adversely affecting
the pictures and/or sound.
i Recorded data may be damaged,
or pictures may be distorted, by
strong magnetic fields created by
speakers or large motors.
i Electromagnetic wave radiation
generated by microprocessors
may adversely affect this unit,
disturbing the pictures and/or
sound.
i If this unit is adversely affected by
electromagnetic equipment and
stops functioning properly, turn
this unit off and remove the
battery or disconnect AC adaptor.
Then reinsert the battery or
reconnect AC adaptor and turn
this unit on.
186
VQT3P35
Do not use this unit near radio
transmitters or high-voltage lines.
i If you record near radio
transmitters or high-voltage lines,
the recorded pictures and/or
sound may be adversely affected.
Make sure to use the supplied
cords and cables. If you use
optional accessories, use the
cords and the cables supplied
with them.
Do not extend the cords and the
cables.
Do not use insecticides or volatile
chemicals near or on the camera.
i If the camera is sprayed with
such chemicals, its body may be
marred and the surface finish
may peel off.
i Do not allow prolonged contact
with rubber or plastic products.
When carrying the camera, do not
drop or bump it.
i A strong impact can break the
camera's casing, causing it to
malfunction.
Cleaning
Before cleaning the camera, remove
the battery and disconnect the
power cord from the power outlet,
and then wipe the camera with a
soft dry cloth.
i For stubborn dirt, soak a cloth in
water, wring it out well, and use it
to wipe the dirty surfaces. Then
dry the surfaces with a dry cloth.