Panasonic HM-TA2 Owner's Manual page 79

Problem
If the SD card is
inserted in another
device, it is not
recognized.
Color or brightness
of the image
changes, or you may
see horizontal bars
in the image.
The LCD monitor
flickers indoors.
"Error occurred.
Please turn unit off,
then turn on again."
is displayed.
Check points
≥ Check that the device is compatible
with the capacity or type of SD card
(SD Memory Card/SDHC Memory
Card/SDXC Memory Card) that you
inserted. Refer to the operating
instructions of the device for details.
≥ Color or brightness of the image may
change, or you may see horizontal
bars in the image when the object is
recorded under fluorescent light,
mercury light or sodium light, etc., but
this is not a malfunction.
≥ The unit has automatically detected
an error. Restart the unit by turning off
and on.
≥ Press the RESET button with the
stylus pen. (l 80)
≥ Repair is needed if it is repeatedly
displayed even if it is restarted.
Contact consumer support. (l 101,
102) Do not attempt to repair the unit
by yourself.
79
VQT3N87