Cub Cadet 1000 Series Service Manual page 3

2.7. A torsion spring keeps the latch secure until the
lower pivot latch is intentionally pulled up, to
open the hood. See Figure 2.7.
Torsion Spring
Upper
Pivot
Latch
Cotter
Pin
Lower
Pivot
Latch
Figure 2.7
2.8. The hood latches to a sturdy rod that is mounted
to the front of the frame.
Hood Latch Rod
Figure 2.8
3. HOOD PANEL REMOVAL: 1500 SERIES
NOTE: Use this procedure if the hood alone is to
be removed. Typical reasons might include
replacement because of damage to the hood, or
to ease access for other service.
3.1. Disconnect ground cable from battery using a
7/16" wrench.
Pivot
Rod
See Figure 2.8.
5
3.2. Disconnect headlight harness (plugged secured
to hood lift cylinder). See Figure 3.2.
Headlight
Harness
Figure 3.2
3.3. Remove the air deflector baffle using a 3/8"
wrench. See Figure 3.3.
Figure 3.3
3.4. Support the hood as it is being loosened.
3.5. Separate hood from hinge using a 3/8" wrench.
3.6. Lift hood off of tractor.
Series 1000 and 1500