Download Print this page
Cub Cadet 1000 Series Service Manual

Cub Cadet 1000 Series Service Manual

Riding tractors new hood design part 2
Hide thumbs Also See for 1000 Series:

Advertisement

2.
NEW HOOD DESIGN
2.1.
Early 1000 and 1500 Series tractors used a vari-
ety of steel hoods and side panels. Later ones
resembled those used on the 2000 and 2500
Series tractors.
2.2.
The hood presently used on the 1000 series
tractors is a molded 1-piece design. See Figure
2.2.
2.3.
The 1000 Series hood opens from the back.
See Figure 2.3.
3
Series 1000 and 1500
Figure 2.2
Figure 2.3

Advertisement

loading

Summary of Contents for Cub Cadet 1000 Series

  • Page 1 Series 1000 and 1500 NEW HOOD DESIGN 2.1. Early 1000 and 1500 Series tractors used a vari- ety of steel hoods and side panels. Later ones resembled those used on the 2000 and 2500 Series tractors. 2.2. The hood presently used on the 1000 series tractors is a molded 1-piece design.
  • Page 2 Series 1000 and 1500 2.4. The 1000 Series hood can be easily removed: • A pair of gas charged cylinders provide lift assist. See Figure 2.4. See Figure 2.5. Gas lift Cylinders Pivot Rod Figure 2.5 Figure 2.4 2.6. A new spring-loaded latch was added to hold the hood closed.
  • Page 3 Series 1000 and 1500 2.7. A torsion spring keeps the latch secure until the 3.2. Disconnect headlight harness (plugged secured lower pivot latch is intentionally pulled up, to to hood lift cylinder). See Figure 3.2. open the hood. See Figure 2.7. Headlight Harness Torsion Spring...

This manual is also suitable for:

1500 series