Device Alerts (Advanced Mode Only) - Cradlepoint IBR60 User Manual

IBR600 | USER MANUAL Firmware ver. 3.3.0
CRADLEPOINT

8.2 Device Alerts (Advanced Mode only)

The Device Alerts submenu choice allows you
to receive email notifications of specific system
events. YOU MUST ENABLE AN SMTP EMAIL
SERVER TO RECEIVE ALERTS. Alerts can be
included for the following:
 Firmware
Upgrade
firmware update is available for this
device.
 WAN
Device
attached WAN device has changed
status. The
plugged, unplugged, connected, and
disconnected.
 Login Failure: A failed login attempt has been detected.
 Full System Log: The system log has filled. This alert contains the contents of the system log.
 Recurring System Log: The system log is sent periodically. This alert contains all of the system events since the
last recurring alert. It can be scheduled for daily, weekly and monthly reports. You also choose the time you want
the alert sent.
SMTP Mail Server
8.2.1
Since the IBR600 does not have its own email server, to receive alerts you must enable an SMTP server. This is possible
through most email services (Gmail, Yahoo, etc.).
Each SMTP server will have different specifications for setup, so you have to look those up separately. The following is an
example using Gmail:
© 2011 CRADLEPOINT, INC.
Available: A
Status Change: An
possible statuses are
PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 121