Connecting Your Devices - Hitachi CPX2 User's Manual And Operating Manual

Setting up

Connecting your devices

Be sure to read the manuals for devices before connecting them to the projector.
Make sure that all the devices are suitable to be connected with this product, and
prepare the cables required to connect.
Please refer to the following illustrations to connect them.
VCR/DVD
player
PC
NOTE • The SD card slot is in the side opposite to the lamp cover of the
projector. Please see the "Using an SD card" (10).
• To display a signal from LAN, USB STORAGE or SD CARD, select the input
signal to "MIU". (15)
• The COMPUTER IN port can support a component signal also. For more
information, please see the description of the COMPUTER IN item of the
INPUT menu (30).
WARNING ►Do not disassemble or modify the projector and accessories.
►Be careful not to damage the cables, and do not use damaged cables.
CAUTION ►Turn off all devices and unplug their power cords prior to
connecting them to projector. Connecting a live device to the projector may
generate extremely loud noises or other abnormalities that may result in
malfunction or damage to the device and the projector.
►Use appropriate accessory or otherwise designed cables. Ask your dealer
about non-accessory cables which may have to be of a specific length or
equipped with a core. For cables with a core only at one end, connect the end
with the core to the projector.
►Make sure that devices are connected to the correct ports. An incorrect
connection may result in malfunction or damage to the device and the projector.
8
COMPUTER IN1
S-VIDEO
K
VIDEO
COMPONENT
AUDIO OUT
VIDEO OUT
C /P C /P Y L R
R R B B
USB
storage
USB STORAGE
DC 5V 0.5A
LAN
K
USB USB STORAGE
COMPUTER IN2
DC 5V 0.5A
AUDIO OUT
AUDIO OUT
S-VIDEO OUT
L R
L R
USB
COMPUTER IN
S-VIDEO
VIDEO
AUDIO OUT
AUDIO IN
Speakers
AUDIO
IN
AUDIO OUT
AUDIO IN