Playing Repeatedly; Use The Usb - Hitachi AX-M136i Instruction Manual

6. Press the Album Up button (
the next/previous directory, and play the first track of this directory.
If the playing is stopped, press the Album Up button (
remote control to select the next/previous directory.
Then choose the track with the Next button (
7. Press the Play/Pause button (
8. Press the Stop button (
Note: Play will continue to the final track when the selected tracks have been played.
The first 2 digits of the display is the directory number, the next 3 digits is the track number
and the remaining digits display the minutes and seconds.

Playing Repeatedly

ONE, DIR and ALL repeat play can be set by pressing the Mode button (
First press : To repeat the same track, the words "
Second press : To repeat ALB (Album), the words "
Third press : To repeat ALL (All directories and tracks), the words "
Fourth press : To cancel the repeat playing, the word "
You can use this function to repeat playing certain part of a track.
When it is playing, press the repeat A-B button (
content that needs repeat playing. Press the repeat A-B button (
content that needs repeat playing. Then the player will repeatedly play between A and B until you
press the repeat A-B button (
playing mode.
Note: A-B repeat function can only be used within the same track.

Use the USB

By connecting an USB mass storage device (including USB flash memory, USB flash players or
memory cards) to this unit, you can enjoy the device's stored music through the powerful speakers
of Hi-Fi system.
1. Insert the USB device's USB plug into the
2. Press the USB button on remote control or press the Function button (
the amplifier to select the USB function.
3. The device's stored music will be played automatically.
4. When you store more one folders in the USB flash, use the Album Up button (
Down button (
ALB-
track with the Next button (
For the devices with USB cables:
1. Insert one plug of the USB cable (not supplied) to the
2. Insert the other plug of the USB cable to the USB output terminal of the USB device.
For the memory card:
1. Insert the memory card into a card reader (not supplied).
2. Use a USB cable (not supplied) to connect the card reader into the
USB Storage Device Data Protection
Always insert the USB device in the correct direction. Failure to do so may result in damage
to the USB device and this product.
) or Album Down button (
ALB+
BF
) to start play the disc.
L
) to stop playing.
again to cancel the this function. The unit will then turn to normal
A-B)
) on the remote control to select the next/previous folder. Then choose the
G
) or Previous button (
) on the remote control to select
ALB-
) or Album Down button (
ALB+
G
) or Previous button (
" blink.
TRK REP
" blink.
ALB REP
" disappears.
REP
on the remote control at the beginning of the
A-B)
socket on the rear of unit.
H
) to play the folder.
socket on the set.
- 16 -
ALB-
H
).
).
MODE
" do not blink.
ALB TRK REP
again at the end of the
A-B)
) on the panel of
FUNCTION
) or Album
ALB+
socket on the set.
) on the