Fm Radio; Presetting Stations; To Change The Fm Reception Mode - Hitachi AX-M136i Instruction Manual

Resetting the system
1. In the DAB mode, press and hold the Display button (
Vacuum Fluorescent Display (
2. Press the Play/Pause button (
automatically start a quick scan all over again.
Note: If no DAB signal is found, it may be necessary for you to relocate your radio. Alternatively,
please visit http://www.ukdigitalradio.com/coverage to check whether the DAB cover
age is available in your area.

FM Radio

You can listen to FM stations. Stations can be tuned in manually, automatically, or from preset
memory storage.
Caution: Before listening to the radio, please check that the FM antenna is correctly connected and
adjusted for length and direction.
Tuning in a Station
1. Repeatedly press the Function button (
displayed on the display screen, or press the Tuner Function button (
2. Tune in a station using one of the following methods.
Auto Tuning
If you press the Intro/Scan button (
"AUTOSCAN" and the auto tuning would start.
Manual Tuning
Repeatedly press the Tuning Backward/Forward buttons (
D D D
D D
or press the /
station you want.
Preset Tuning (Available only after the stations are preset)
Repeatedly press the Preset Up/Down switch buttons (
H H H H H G G G G G
press the /
and frequency are displayed on the Vacuum Fluorescent Display (

Presetting Stations

You can manually preset up to 20 FM stations.
Tune in the desired station:
1. Press the Program button (
2. Press the Preset Up/ Down switch buttons (
H H H H H G G G G G
/ buttons on the remote control to select the preset number.
H H H
H H
/
- PRESET
G G G G G
/
PRESET +
Note: If you select more than 20, the preset number will be changed to "1" automatically.
3. Press the Program button (
broadcast frequency display.
4. Repeat above steps 1 to 3 for each station you want to store in memory with a preset number.
Note: If the system is unplugged or if a power failure occurs, the preset stations will not be erased
after stored.

To change the FM Reception Mode

Press the Mode button (
mode.
).
VFD
BF
) to confirm. The system will clear its internal memory and
INTRO/SCAN
C C C
C C
buttons on the remote control to change the frequency until you find the
buttons on the remote control to select the desired preset number. Its band
) on the remote control, the preset number will be displayed.
PROG
Decrease the preset number by 1
Increase the preset number by 1
) again to store the station. The display will return to the
PROG
) to select the Auto or Mono channel to receive the best FM reception
MODE
DISPLAY
) on the front of the amplifier until FM Radio is
FUNCTION
) button on the remote control, display will show
- TUNING +
- PRESET +
) on the top of the CD player or the
- PRESET +
- 13 -
) until "SYS RESET" appears on the
) on the remote control.
) on the top of the CD player
) on the top of the CD player or
).
VFD