Setting The Area Code - Hello Kitty HK250 Owner's Manual

HK250.O/M.QXD 9/26/02
SET-UP INSTRUCTIONS (CONTINUED)

SETTING THE AREA CODE

In order for the Caller ID redial feature to work properly, you must set the phone to
your local area code as described below. If you live in a town with more than one
area code, do not enter an area code for this option.
1
1
Press and hold the ERASE button
for more than two seconds or press
the TALK button
displayed number and return to the
Standby mode.
3
2
Press the REVIEW/VOLUME
button twice or the REVIEW/
VOLUME❷ button
Area Code menu.
5
Press the PROG button again to store
the area code; "Save ok" will appear in
the display for three seconds and a
confirmation tone will be heard.
3:49 PM Page 10
2
twice to clear any
1
twice to enter the
10
2
While in the Standby mode, press the
PROG button.
4
Use the Key buttons to enter in the
area code.