Table of Contents
Advertisement
Quick Links
CARE AND MAINTENANCE
1. Clean your phone with a damp (never wet) cloth. Solvent or detergent should never
be used.
2. If your phone stops working, check to be certain that all modular plugs are properly
"snapped" into their jacks. If the phone still doesn't work and you have other
telephones installed in your home, check to see if they are working. If they are, try
using your telephone on another outlet. If it still doesn't work, it is more than likely
that there is a problem with your telephone. In this case, return the unit for service
in accordance with the instructions on your warranty card.
DO NOT CALL THE TELEPHONE COMPANY SINCE YOU MAY BE
RESPONSIBLE FOR CHARGES FROM THEM. CHARGES FROM THE
TELEPHONE COMPANY ARE NOT COVERED BY THE TERMS AND CONDITIONS
OF THE WARRANTY.
3. If other telephones in your house have also stopped working, the problem is most
likely with your telephone line service. Do not return your telephone for service since
most likely there is nothing wrong with it. You should however, consult with your
telephone company to see if there has been any interruption to your line service.
4. If it is determined that your telephone is malfunctioning, FCC requires that it be
disconnected from the modular outlet until the problem has been corrected.
5. Always have your unit repaired by an experienced technician or return it for service
to:
Service Department
Spectra Merchandising International, Inc.,
Chicago Industry Tech Park
4230 North Normandy Avenue,
Chicago, IL60634, U.S.A.
Tel: (773) 202-8408 or toll-free hotline 1 -800-777-5331
Conforms to the requirements of ASTM Standard
Consumer Safety Specification on Toy safety, F963
SERVICE
Please refer to the instructions on the enclosed warranty card for returning your unit for
service. When returning the unit, please remove batteries to prevent damage to the
unit in transit and/or from possible battery leakage. We are not responsible for batteries
returned with the product or for the cost of replacement.
CALLER ID TELEPHONE
OWNER'S MANUAL
KT2012
SUBSCRIPTION TO CALLER ID SERVICE FROM YOUR LOCAL
TELEPHONE COMPANY IS REQUIRED FOR ALL CALLER ID FEATURES
TO OPERATE CORRECTLY
PLEASE READ AND FOLLOW THIS MANUAL BEFORE USING YOUR TELE-
Printed in China
PHONE AND KEEP IT FOR FUTURE REFERENCE
Advertisement
Table of Contents
Related Manuals for Hello Kitty KT2012
Summary of Contents for Hello Kitty KT2012
- Page 1 If they are, try using your telephone on another outlet. If it still doesn’t work, it is more than likely that there is a problem with your telephone. In this case, return the unit for service in accordance with the instructions on your warranty card.
-
Page 2: Important Safety Instructions
13. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. 14. Do not use the telephone to report a gas leak in the vicinity of a leak. 15. Never install telephone wiring during a lightning storm. -
Page 3: Fcc Information
MALFUNCTION OF THE EQUIPMENT If the device is not operating properly, the user should immediately disconnect it from the telephone line as it may cause harm to the telephone network. In the event service is needed the user should contact: Service Department Spectra Merchandising International, Inc.,... - Page 4 2. When used with Caller ID service, the unit displays the name and telephone number of the person calling, along with the date and time of the call before you pick up your...
-
Page 5: Controls And Features
6. Erase button allows call records to be deleted individually or collectively. 7. Real Time Clock - Time and date will be automatically set by the local telephone company when the phone rings. 8. Calling back a number from the Caller ID Memory. - Page 6 SETUP IS COMPLETED. Connect the coiled cord to the handset and base. Connect the long telephone cord into the jack on the bottom of the base, thread it through the groove toward the back of the base. LOCATION OF CONTROLS (CONTINUED)
-
Page 7: Setup Procedure
SETUP PROCEDURE DO NOT CONNECT the line cord to the wall outlet until the caller ID setup has been completed. Set the language, contrast, time and date as follows: Press and hold the [M] and [L] buttons SELECT THE LANGUAGE simultaneously for four seconds until Press the [M] or [L] button to select "ENTER LANGUAGE"... - Page 8 Pulse after hanging up. STORING AND REDIALING NUMBERS IN THE SPEED-DIAL MEMORY This telephone has ten speed-dial memories to store up to 10 of your most frequently called numbers for easy two-touch redialing. Each of the 10 memories can store numbers of up to 16 digits.
- Page 9 BASIC OPERATIONS (CONTINUED) Verify that the number on the display is Press the number “1” button to store the correct, then press the STORE button displayed number in memory location 1. again. The Memory indicator (“MEM”) Repeat steps 1 through 4 to store up to will appear in the display.
- Page 10 BASIC OPERATIONS (CONTINUED) COPYING CALLER ID INFO TO A MEMORY PRESET Press the [M] or [L] button to locate a Press the STORE button twice: caller ID call to be copied into a “MEM” will be displayed on the display. memory preset.
-
Page 11: Troubleshooting
Pressing a Memory button does not display number The Caller ID unit will not function until you have Caller ID service from your local telephone company. Call your local telephone company to have Caller ID installed on your phone line. -
Page 12: Consumer Information
This equipment is hearing aid compatible. NOTICE : If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment KT2012 does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer.