Emerson Research SmartSet CKD5811 Owner's Manual page 18

Presetting Stations In The Tuner Memory
You can store a total of 20 stations, 10 FM and 10AM, in the tuner memory for
easy recall at any time.
1.) Using either the Automatic or Manual
Tuning method described above, tune
to the first station you wish to store in
the tuner memory.
Example: FM 92.5 MHz
2.) When the desired frequency appears on the display press the MEMORY button
once.
"F 1" will begin flashing on the display
indicating that you can now store your
station in FM Preset Memory #1.
3.) Press the MEMORY button again. The flashing "F 1" disappears and the station
frequency returns to the display. This indicates that FM 92.5 is now stored in
FM Preset Memory #1.
4.) Tune to the next station that you wish to store.
Press the MEMORY button once, then
press the PRESET + button to select
Preset Memory number 2.
"F 2" begins flashing in the display.
5.) Press the MEMORY button once more to enter your desired station in Preset
Memory number 2.
6.) Repeat steps 4 and 5, using the PRESET – or + buttons to select a different
preset memory number each time until you have stored up to 10 FM stations in
the memory.
7.) Press the AM/FM button to switch to the AM band and repeat the above
procedure to store up to 10 AM stations in the tuner memory.
CKD5811_080306.p65
17
17 3/8/2006, 11:01