Zenith Z32LC6D - 720p LCD HDTV Installation And Operating Manual page 87

21.
22.
Blue Adjustment (Command: k $)
To adjust blue in color temperature.
Transmission [k] [$][ ][Set ID][ ][Data] [Cr] ....
Data Min: 0 - Max: C8
*Refer to 'Real data mapping 2: See page 85.
ACknowledgamen_ [$][ ][Set ID][ ][OKTNG] [Data] [x]
Channel Tuning (Command: m a)
To tune channel to following physical/major/minor number.
Transmission
[m] [a][] [Set ID] [ ] [Data0] [ ] [Data1]
[] [Data2] [ ] [DataS] [ ] [Data4] [ ] [Data5] [Cr]
Digital channels have a Physical, Major, and Minor channel
number. The Physical number is the actual digital channel
number, the Major is the number that the channel should
be mapped to, and the Minor is the sub-channel. Since
the ATSC tuner automatically maps the channel to the
Major number, the Physical number is not required when
sending a command.
Data 0: Physical Channel Number
NTSC air: 02-45, NTSC cable: 01,0E-7D
ATSC air: 01-45, ATSC cable: 01-87
Data1 & 2: Major Channel Number
Data1: High byte Data2: Low byte
Two bytes are available for the Major and Minor, nor-
mally only the second byte is used.
Data3 & 4: Minor Channel Number
Not needed for NTSC.
Z
X
86