Asianux Ax [Em64T] - EMC CLARiiON AX150 Series Data Book

Operating
No. System
1 Asianux AX Generic NIC 10/100
[AMD64] 1.0 QLA4010C−E−SP
7, 8, 9
SP3 QLA4050C−E−SP
2 Asianux AX IBM QLogic iSCSI Exp Card for BladeCenter (26K6487)
[AMD64] 1.0
7, 8, 9
SP3
1. BIOS 1.11 Available in the EMC−approved section of the QLogic website. http://www.qlogic.com
2. Driver Version 3.27 Available in the EMC−approved section of the QLogic website. http://www.qlogic.com
3. Firmware Version 3.00.00.16
4. Require BIOS, Driver and Firmware available from EMC−approved section of Qlogic website.
5. QLogic iSCSI HBAs are supported in any server listed in the ESM Fibre Channel tables that list support for the QLA2340 HBAs with the same operating system version listed here.
6. Requires SANsurfer for installation and configuration and is available for download from the EMC−approved section of the QLogic website at http://www.qlogic.com
7. Support kernels: 2.4.21−47.22AX. Confirm kernel version with server vendor.
8. The LVM included as part of this update is supported and can be used in conjunction with PowerPath emcpower pseudo device file names as well as native sd device file names.
9. Asianux 1.0 SP3 includes Red Flag DC Server 4.1 SP3,Miracle Linux v3.0 SP3, Haansoft Linux 2005 Server Asianux Inside SP3.
10. The software initiator is part of the operating system and not an EMC software product. Please refer to the required release note "EMC Linux iSCSI Attach Release Notes", p/n
300−002−672, that can be found on EMC's Powerlink website in Support −> The Document Library −> Host Connectivity for the complete installation information.
11. LAN support includes direct connect (layer 2), switched (layer 2), or routed (layer 3) networks. Network should be designed to minimize packet loss or any other interruptions.
12. Routed networks (layer 3) require iSCSI digest to be enabled.
13. NIC teaming with the Linux software initiator is not supported.
14. Driver Version iSCSI initiator 3.6.3 Driver is integrated into the kernel.
15. BIOS 1.08 Available in the EMC−approved section of the QLogic website. http://www.qlogic.com
16. Firmware Version 3.01.00.49 Available in the EMC−approved section of the QLogic website. http://www.qlogic.com
17. BIOS 1.09a Available in the EMC−approved section of the QLogic website. http://www.qlogic.com
18. Firmware Version 2.00.00.45 Available in the EMC−approved section of the QLogic website. http://www.qlogic.com
19. BIOS 1.08
20. Driver Version 3.27

Asianux AX [EM64T]

Operating
No. System
1 Asianux AX Generic NIC 10/100
[EM64T] 1.0
3, 4, 5
GA
2 Asianux AX Generic NIC 10/100
[EM64T] 1.0 QLogic QLA4010C−E−SP
5, 10, 11
SP3 QLA4050C−E−SP
3 Asianux AX IBM QLogic iSCSI Exp Card for BladeCenter (26K6487)
[EM64T] 1.0
5, 10, 11
SP3
1. Driver Version iSCSI Initiator 3.6.2−3 Available from the OS distributor by request.
2. The software initiator is part of the operating system and not an EMC software product. Please refer to the required release note "EMC Linux iSCSI Attach Release Notes", p/n
300−002−672, that can be found on EMC's Powerlink website in Support −> The Document Library −> Host Connectivity for the complete installation information.
3. Support kernels: 2.4.21−20.19AX, 2.4.21−20.29AX. Confirm kernel version with server vendor.
4. Asianux 1.0 GA include Red Flag DC Server 4.1 GA, Miracle Linux MLSE 3.0 GA.
5. The LVM included as part of this update is supported and can be used in conjunction with PowerPath emcpower pseudo device file names as well as native sd device file names.
6. NIC teaming with the Linux software initiator is not supported.
7. Routed networks (layer 3) require iSCSI digest to be enabled.
8. LAN support includes direct connect (layer 2), switched (layer 2), or routed (layer 3) networks. Network should be designed to minimize packet loss or any other interruptions.
9. Requires SANsurfer for installation and configuration and is available for download from the EMC−approved section of the QLogic website at http://www.qlogic.com
10. Support kernels: 2.4.21−47.22AX. Confirm kernel version with server vendor.
11. Asianux 1.0 SP3 includes Red Flag DC Server 4.1 SP3,Miracle Linux v3.0 SP3, Haansoft Linux 2005 Server Asianux Inside SP3.
12. Firmware Version 2.00.00.45 Available in the EMC−approved section of the QLogic website. http://www.qlogic.com
13. Driver Version 3.27 Available in the EMC−approved section of the QLogic website. http://www.qlogic.com
14. BIOS 1.09a Available in the EMC−approved section of the QLogic website. http://www.qlogic.com
15. Require BIOS, Driver and Firmware available from EMC−approved section of Qlogic website.
16. QLogic iSCSI HBAs are supported in any server listed in the ESM Fibre Channel tables that list support for the QLA2340 HBAs with the same operating system version listed here.
17. BIOS 1.08
18. Driver Version 3.27
19. Firmware Version 3.01.00.49 Available in the EMC−approved section of the QLogic website. http://www.qlogic.com
20. Driver Version iSCSI initiator 3.6.3 Driver is integrated into the kernel.
21. BIOS 1.08 Available in the EMC−approved section of the QLogic website. http://www.qlogic.com
22. Firmware Version 3.00.00.16
23. BIOS 1.11 Available in the EMC−approved section of the QLogic website. http://www.qlogic.com
Asianux AX [x86_64]
Operating
No. System
1 Asianux AX Generic NIC 10/100
[x86_64] 2.0
2, 23, 24
GA
2 Asianux AX IBM QLogic iSCSI Exp Card for BladeCenter (26K6487)
[x86_64] 2.0 QLA4010−E−SP
2, 14, 15
SP1 QLA4050−E−SP
5, 6, 7, 27
, QLogic QLA4050C−E−SP
3 Asianux AX IBM QLogic iSCSI Exp Card for BladeCenter (26K6487)
[x86_64] 2.0 QLA4010−E−SP
1, 2, 3
SP2 QLA4050−E−SP
03/04/2009
Asianux AX [AMD64]
Host Bus Adapter
13, 14 13, 14
, Generic NIC GbE , QLogic QLA4010−E−SP
1, 2, 3, 4, 5, 6 2, 4, 5, 6, 15, 16
, QLogic QLA4050−E−SP
2, 4, 5, 6, 15, 16
, QLogic QLA4052C−E−SP
2, 6, 17, 18
Asianux AX [EM64T]
Host Bus Adapter
1, 6 1, 6
, Generic NIC GbE
6, 20 6, 20
, Generic NIC GbE , QLogic QLA4010−E−SP
9, 13, 15, 16, 22, 23
, QLogic QLA4050−E−SP
9, 13, 15, 16, 19, 21
, QLogic QLA4052C−E−SP
9, 12, 13, 14
Asianux AX [x86_64]
Host Bus Adapter
21, 22 21, 22
, Generic NIC GbE
6, 7, 11, 12, 13
, QLogic QLA4010C−E−SP
4, 5, 6, 7, 27 4, 5, 6, 7, 31
, QLogic QLA4050−E−SP
4, 5, 6, 7, 31
6, 7, 10, 11, 13
, QLogic QLA4010C−E−SP
4, 5, 6, 7, 10
, QLogic QLA4050C−E−SP
1, 2, 3, 4, 5, 6
, QLogic
, QLogic
4, 5, 6, 16, 19, 20
9, 13, 15, 16, 22, 23
,
9, 13, 15, 16, 19, 21
, QLogic
9, 15, 16, 17, 18, 19
7, 12, 18, 19, 20
, QLogic
6, 11, 13, 16, 17
, QLogic
4,
, QLogic QLA4050C−E−SP
7, 10, 18, 19, 20
, QLogic
6, 10, 11, 13
, QLogic
4, 5, 6, 7, 10
997
Network Storage External
Configuration Array Boot
11, 12
LAN Only EMC N
CLARiiON
AX150i
11, 12
LAN Only EMC N
CLARiiON
AX150i
Network Storage External
Configuration Array Boot
7, 8
LAN Only EMC N
CLARiiON
AX150i
7, 8
LAN Only EMC N
CLARiiON
AX150i
7, 8
LAN Only EMC N
CLARiiON
AX150i
Network Storage External
Configuration Array Boot
8, 9
LAN Only EMC N
CLARiiON
AX150i
8, 9
LAN Only EMC N
CLARiiON
AX150i
8, 9
LAN Only EMC N
CLARiiON
AX150i
CLARiiON AX150i
Comments
10, 11
See
Comments
2
See
2, 8
See
Comments
CLARiiON AX150i