Figure. Cable connections
Power Connection
Insert the power plug into the 110-240V AC wall outlet. If you have difficulty inserting the plug, turn it over and
re-insert it.
Antenna Connection
Connect TV RF sources to the antenna port. TV RF signals include: receiving antenna/CATV net. You can
use 75 Ohm coaxial cable to connect outdoor antenna.
Wall
Antenna
Socket
Outdoor
Antenna
(VHF, UHF)
Antenna
NOTE:
•
In poor signal areas, to achieve better picture quality it may be necessary to install a signal amplifier to
the antenna as shown above.
•
If signal needs to be split for two TVs,use an antenna signal splitter for connection.
Cable Connections
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
RF Coaxial Wire (75 ohm)
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
UHF
Signal
Amplifier
VHF
IMPORTANT NOTICE
1.
Be sure to have all necessary
connections properly done before
connect the power supply.
2.
If the product will not be used for a
long period of time, disconnect the
power.
6