Call Button - Cobra MICROTALK CXR925C Owner's Manual

Intro Operation
Main Icons
Using Your Radio
Operation
Intro Operation Customer
Channels
Assistance
With the radio on, select any of the
Channel Button
Secondary Icons
22 channels by pressing the Channel Up
Intro Operation
or Channel Down button.
Secondary Icons
Channels 1 through 7 are shared by FRS and GMRS.
Notice
Secondary Icons
Channel Number
Channels 8 through 14 are FRS only. Channels 15
through 22 are GMRS only.
Notice
Notice
Listening for a Response
Main Icons Release the Talk button to receive incoming
Listening
transmissions. Your microTALK
Standby mode while the Talk or Call buttons are
not pressed.
Intro Operation

Call Button

To alert another person that you are calling:
Call Button
– Press and release the Call button.
The other person will hear a two (2) second
Secondary Icons call tone. This tone is used only to establish voice
communications.
Notice
To Illuminate Display
Press and release the Light/Max Range
Light/Max Range
button to illuminate the display for
10 seconds.
English
4
Customer Warranty
Assistance
Warranty
Customer Warranty
Assistance
Both radios must be tuned to the
same channel to communicate.
See page 26 for FRS/GMRS frequency
allocations and compatibility charts.
radio is always in
®
Customer Warranty
Assistance
See page 24 on how to select from
10 available call tone settings.
Introduction
Time-out Timer
•
Main Icons
Talk Button
Secondary Icons
Intro
Selectable High•Medium•Low
Power Output
Hi-Low Button
Secondary Icons
•
Hi Power Icon
Main Icons
•
Medium Power
Icon
Intro
Low Power Icon
Secondary Icons
•
Operation Customer Assistance Warranty
Intro Operation Customer
Assistance
The Time-out Timer feature limits transmit time to
three (3) continuous minutes to extend battery life
and prevent accidental operation. After three (3)
continuous minutes of transmission, the radio will
stop transmitting and will require a rest period of 30
seconds. During this time the display will flash on
and off, and an error tone will sound if the Push-to-
Operation Customer Warranty
Assistance
Talk button is pressed.
When in close proximity to another party or during
Notice
favorable conditions, you can switch from High to
Medium to Low Power to extend battery life.
This feature applies to GMRS Channels
1 through 7 and 15 through 22 only.
Channels 8 through 14 operate exclusively
Notice
on low power.
To switch from high to medium to low power:
– Press and release the Hi•Low button.
When in High Power and using Channels 1 through
7 and 15 through 22, the Hi icon will be visible in
the LCD display.
Operation Customer Warranty
Assistance
When in Medium Power and using Channels 1
through 7 and 15 through 22, the Med icon will be
visible in the LCD.
When in Low Power or while using channels 8
through 14, the Low icon will be visible in the
display.
When using an external speaker/
microphone accessory on channels 1-7
or 15-22, your microTALK
Notice
operate on medium or low power.
Nothing Comes Close to a Cobra
Warranty
•
•
radio will only
®
5
®