Cobra MICROTALK CXR925C Owner's Manual page 11

Mode Functions
Operation
Intro Operation Customer
To recall a stored memory channel location:
Intro Operation
Mode Button
Main Icons
Assistance
1. Press the Mode button until the Memory icon
and the memory location number flash on the
display.
2. Press the Channel Up or Channel Down button
Secondary Icons to select a memory location
Memory Icon
Secondary Icons
Intro Operation
(0 through 9).
Channel Button
Notice
Secondary Icons
3. Press the Talk button to return to Standby mode
Notice
on the selected memory location.
Notice
While recalling a stored memory location,
if you do not press any buttons for 15 seconds, your
radio will automatically return to Standby mode
on the channel/privacy code displayed before you
entered mode functions.
16 English
Warranty
Customer Warranty
Assistance
Customer Warranty
Assistance
If a location has been programmed before,
its associated channel/privacy code will be
shown on the display.
A memory location can be reprogrammed at
any time it is displayed and flashing. Press
the Lock/Enter button to begin.
Introduction Operation
Intro Operation
To de-program a memory location:
Intro Operation Customer
Mode Button
Assistance
1. Press the Mode button until the
Memory icon and the memory location
flash on the display.
2. Press the Channel Up or Channel Down button
to select the memory location
Secondary Icons
Memory Icon
Secondary Icons
(0 through 9).
If a location has been programmed before,
its associated channel/privacy code will be
shown on the display.
Channel Button
Notice
3. Press the Lock/Enter button. The channel
Notice
numbers will flash on the display.
4. Press the Channel Up or Channel Down button
to select Channel 0.
5. Choose one of the following:
Lock/Enter Button
a. Press the Lock/Enter button to enter
the channel/privacy code in the selected
memory location and return to the beginning of
memory location options.
b. Press the Mode button to
Channel 0
enter the channel/privacy code in
the selected memory location and
proceed to other functions on the channel/
privacy code displayed
before you entered mode functions.
While de-programming a memory location,
if you do not press any buttons for 15 seconds, your
radio will automatically return to Standby mode
on the channel/privacy code displayed before you
entered mode functions.
Customer Assistance Warranty
Customer Warranty
Warranty
Assistance
Nothing Comes Close to a Cobra
17
®