Accessing Commands; Sensor Bypass Operation; Button Auto Lock; Car Select - Clifford 590.4X Owner's Manual

Responder hd

Table of Contents

Using the 1 way companion remote

The companion 1 way remote commands the system features as

shown in the previous table, but without the message display of the Re-

sponder HD remote. Siren chirps and vehicle parking light ﬂashes are

used to indicate that a command has been received and activated as

described in the Basic and Advanced command sections.

Accessing Commands

Similar to the HD remote, Basic commands are performed when

a command button is pressed directly. To perform Advanced Com-

mands press the

button 1 to 4 times to access function levels,

in the table for example implies pressing

4 times. The LED ﬂashes in

groups for a few seconds to indicate the level. Press the desired com-

mand button while the LED is ﬂashing to perform the command.

The lights ﬂash each time this command is received to indicate the

Sensor bypass type. 2 ﬂashes indicates sensor Warn-away zones

are bypassed, 3 ﬂashes indicates sensor Warn-away and Full Trigger

zones are bypassed. 1 ﬂash indicates sensor bypass is off.

When On, the remote control buttons lock if more than 20 seconds

lapses between button presses. If a button is pressed when locked, a

fault tone is emitted. To unlock the buttons; press the

button followed

by the

button, the buttons unlock and tones play to conﬁrm.

Car 2

must ﬁrst be turned On (See Remote Features menu under the

following Programming section to turn on). Press and hold the

but-

Table of Contents