Lightolier Calculite R7029 Specification

Page 1 of 2
Top View
12-1/2"
4-1/2"
10-1/4"
13-1/4"
Molded Overlap Self-Flange
Flush Trim
Trim Ring Matte White
(Molded Trim
Ring Removed)
Ceiling Cutout: 6 9/16" Dia.
Reflector Trims
Finish
Wall Washer Specular Clear
Specular Gold
Corner Wall Washer Specular Clear
Specular Gold
Double Wall Washer Specular Clear
Specular Gold
Features
1. Socket Cup: Die-cast aluminum cup effectively dissipates heat and assures
lamps maintain proper optical alignment to reflector. Snaps onto reflector
neck for easy tool-less installation. Can be adjusted without tools from
inside or outside of fixture to accommodate two different lamp sizes.
Contains medium base porcelain socket with nickel plated screw shell wired
with No. 18 SF1 leads to J-Box.
2. Mounting Brackets: Adjust vertically from inside of fixture. Durable 16 ga.
steel construction. Use with standard 3/4" or 1 1/2" lathing channels, or
1/2"(11/16" O.D.) EMT pipe (by others) or Lightolier accessory mounting bars.
3. Retaining Springs: Precision-tooled springs secure reflector housing to
mounting frame for quick tool-less installation.
4. Insert Reflector: Alzak ® aluminum, 16 ga., "cut-window" reflector allows
light to pass to a separately contoured outer housing reflector. 50° visual
cut-off to lamp and lamp image. Insert reflector contours provide even down-
lighting. Direction of wall wash can be re-oriented after installation.
Attaches with screws for simple installation and maintenance. Reflector sup-
plied with white molded trim ring (field paintable); or self-flanged reflector,
matte white flange or flange finish to match reflector.
5. Junction Box: 14 ga. steel, 4" x 3 1/2" x 2" box allows inspection from
below.
6. Thermal Protector: Meets NEC and UL requirements. Insulation must be
kept 3" away from fixture sides and wiring compartments and must not be
placed above fixture in a manner which will entrap heat.
7. Mounting Frame: Die-cast aluminum suitable for dry or plaster ceilings.
Provides flangeless trim in plaster ceiling.
8. Wall Wash Reflector/Housing: Specular clear or gold 16 ga. Alzak
minum to match insert reflector. Attaches to mounting frame with springs.
Detachable for inspection from below fixture. Reflector provides even wall
wash. Must be installed before ceiling is finished.
Other Reflector Finish Options
Consult Factory
Calculite ® Incandescent Open Wall Washer
9-5/16"
A-21
8-1/4"
A-19
3"
or Polished
1" min.-
2 " max.
(Ceiling Runner)
White Polished
Self-Flange Self-Flange
R7029CLW R7029CLP
S7029GDW S7029GDP
R7030CLW R7030CLP
S7030GDW S7030GDP
R7031CLW R7031CLP
S7031GDW S7031GDP
® alu-
5-7/8" Dia.
Flush Overlap
2
6-1/2" 7-1/4"
Frame-In Kits
Flush/White
Molded Trim Ring
R7029CL R601 Clear
S7029GD S602 Gold
R7030CL R601 Clear
S7030GD S602 Gold
R7031CL R601 Clear
S7031GD S602 Gold
Options & Accessories
18" Mounting Bars
27" Mounting Bars
T-Bar Anchor clips
Wood Joist Mounting Bars
Existing Ceiling clips
Step Down Transformer
Chicago Air Plenum
Electrical
UL Listed for a maximum of 8 No. 12 75°C through branch circuit conductors, or
60°C supply conductors for end of run.
Labels
UL Listed for damp locations, I.B.E.W.
Alzak ® is a registered trademark of ALCOA.
Job Information
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier
a Genlyte Thomas Company
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division) • A0902
R7029
6" Aperture A19 / A21
1
4
5
8
6
3/4" max.
3 7
Ceiling Thickness
Lamp
A19 100W
A21 150W
A19 100W
A21 150W
A19 100W
A21 150W
1950 (Set of 2)
1951 (Set of 2)
1956 (Set of 4, for 1950 & 1951 bars)
7994 (Set of 2)
7998 (Set of 2)
7997 (See separate specification sheet)
LC (add suffix to Frame-in Kit)
Type:
www.lightolier.com