Linksys E-Series
E4200
Top view
Indicator light—Stays on steadily while power is connected and
•
following a successful Wi-Fi Protected Setup connection Pulses slowly
during bootup, during firmware upgrades, and during a Wi-Fi Protected
Setup connection Flashes quickly when there is a Wi-Fi Protected Setup
error
Back view
Ethernet ports
Ethernet ports—Connect Ethernet cables (also called network cables)
•
to these Gigabit (10/100/1000) ports, color coded blue, and to other
wired Ethernet network devices on your network
Indicator light
Internet port—Connect an Ethernet cable (also called a network or
•
Internet cable) to this port, color coded yellow, and to your modem
Wi-Fi Protected Setup™ button—Press this button to easily configure
•
wireless security on Wi-Fi Protected Setup-enabled network devices For
more information, see "Wireless Security" on page 8
USB port—To easily share disk storage with other users on your network
•
or on the Internet, connect a USB drive to this port
Reset button—Press and hold this button for 5-10 seconds (until the
•
port lights flash at the same time) to reset the router to its factory defaults
You can also restore the defaults using the browser-based utility
Power—Connect the included AC power adapter to this port
•
CAUTIon
Use only the adapter that came with your router
Power button—Press | (on) to turn on the router
•
Product overview
Internet port
Power port
Wi-Fi Protected Setup button
Reset button
USB port
2